World Trade Plaza south side, Fuhong Rd, Futian District
Shenzhen, China, 518000
[email protected]
https://waveshare.com/
Am Ostbahnhof 3
Niedersachsen
Clausthal-Zellerfeld, Deutschland, 38678
[email protected]
https://eckstein-shop.de
GTIN: | 4060137076022 |
HAN: | 21179 |
Category: | Development Boards |
Storage Tiers: | Maintain |
Shipping weight: | 0,01 kg |
Item weight: | 0,01 kg |
Dimensions ( Length × Width × Height ): | 5,40 × 2,10 × 1,50 cm |
2.4 GHz WiFi development board based on microcontroller ESP32-S2, 240 MHz Xtensa single-core 32-bit LX7 microcontroller, for C/C++ SDK, MicroPython, CircuitPython development.
This is a WiFi development board with compact size, plenty peripheral interfaces, integrated low-power Wi-Fi System-on-Chip (SoC) and mass memory, supporting Raspberry Pi Pico expansion board ecosystem. Equipped with hardware crypto accelerator, RNG, HMAC and Digital Signature module, it can meet the security requirements of the Internet of Things. Multiple low-power operating states to satisfy power requirements in IoT, mobile devices, wearable electronics, smart home and other application scenarios, etc.
ESP32-S2 LCD Ver. key features:
- On-board 0.96inch 160x80 pixels 65K color IPS LCD display
- On-board single 3.7V lithium battery charge/discharge header, suitable for mobile IoT product design
- Support Raspberry Pi Pico expansion board ecosystem to satisfy creative IoT application development
- Xtensa single-core 32-bit LX7 microprocessor, ESP32-S2FH4, support clock frequency up to 240 MHz
- Integrated 320KB SRAM, 128KB ROM, 8MB PSRAM, 4MB Flash memory
- Support IEEE802.11 b/g/n, on-board 2.4 GHz WiFi ceramic antenna, up to 150 Mbps data transfer rate
- USB-C connector, no more plug orientation problem
- On-chip integrated full-speed USB OTG interface, LCD interface (8-bit serial RGB/8080/6800), TWAI controller (ISO11898-1 compatible), capacitive sensor GPIO, temperature sensor and RMT (TX/RX)
- On-board 1.8A current high efficiency boost/buck DC-DC TPS63000 power supply IC
- Support a variety of low-power operating states for adjusting the optimal balance between communication distance, data rate and power consumption, to meet the power requirements of various application scenarios
- Castellated module allows soldering direct to user-designed carrier boards
ESP32-S2 LCD Ver. Resources
- ESP32-S2FH4: Xtensa single-core 32-bit LX7 microprocessor
- APS6404L-3SQR-SN: 8MB PSRAM
- TPS63000DRCR: high efficiency DC-DC buck-boost chip
- ETA6096: high efficiency Lithium battery recharge manager
- Battery header: MX1.25 header, for 3.7V Lithium battery charging/discharging
- WiFi ceramic antenna
- Pinout: compatible with Raspberry Pi Pico
- USB Type-C connector: for programming, serial printing, etc.
- BOOT button: BOOT button, press BOOT and then RESET button to enter download mode
- RESET button
- 0.96inch IPS LCD: 160x80 resolution, 65K colors
WIKI: http://www.waveshare.com/wiki/ESP32-S2-Pico
Lieferumfang
- ESP32-S2-LCD-0.96-M (LCD Ver. with pinheader) x1
Wiki
Manufacturer according to GPSR
Waveshare International Limited, World Trade Plaza south side, Fuhong Rd, Futian District, 518000 Shenzhen, China, [email protected], https://waveshare.com/
Responsible person according to GPSR
Eckstein GmbH, Am Ostbahnhof 3, 38678 Clausthal-Zellerfeld, Niedersachsen, Deutschland, [email protected], https://eckstein-shop.de