World Trade Plaza south side, Fuhong Rd, Futian District
Shenzhen, China, 518000
[email protected]
https://waveshare.com/
Am Ostbahnhof 3
Niedersachsen
Clausthal-Zellerfeld, Deutschland, 38678
[email protected]
https://eckstein-shop.de
GTIN: | 4060137089244 |
HAN: | 20225 |
Category: | Expansion Boards |
Storage Tiers: | Maintain |
Shipping weight: | 0,51 kg |
Item weight: | 0,42 kg |
Dimensions ( Length × Width × Height ): | 11,46 × 9,15 × 3,29 cm |
Dual Gigabit Ethernet Base Board / Mini-Computer designed for Raspberry Pi Compute Module 4
Version Option
- Dual Gigabit Ethernet Base Board
- Dual Gigabit Ethernet Mini-Computer Kit In addition to the Dual Gigabit Ethernet Base Board, it is equipped with Aluminum Alloy case, fan and power supply adapter
Specifications
- CM4 socket :suitable for all variants of Compute Module 4
- Ethernet: Dual Gigabit Ethernet RJ45
- USB: USB 3.2 Gen1 x 3
- Pin header: 40PIN GPIO header x 1
- DSI display: MIPI DSI display port x 1, 15pin 1.0mm FPC connector
- CSI camera: MIPI CSI-2 camera port x 2, 15pin 1.0mm FPC connector
- HDMI: HDMI x 2, supports 4K 30fps output
- RTC: Real-time clock with battery socket and ability to wake Compute Module 4
- TF card slot: TF card socket for Compute Module 4 Lite (without eMMC) variants
- Fan: 5V/12V, allows speed adjustment and measurement
- Power input 7V-36V
- Dimensions 109.0 x 91.5mm
What's On Board
- CM4 socket suitable for all variants of Compute Module 4
- 40PIN GPIO headerfor connecting sorts of HATs
- RJ45 Gigabit Ethernetdual RJ45 Gigabit Ethernet, 10/100/1000M compatibleETHERNET 0: CM4 original ETHETHERNET 1: USB extended ETH
- USB 3.2 ports3x USB 3.2 Gen1, for connecting sorts of USB devices
- HDMI connectors2x HDMI, supports 4K 30fps output
- CAM2x MIPI CSI camera ports
- DC power supply 7~36V DC wide voltage range power input
- Dual LED indicatorsred: Raspberry Pi power indicatorgreen: Raspberry Pi operating status indicator
- TF card slotfor connecting a TF card with pre-burnt image (Lite variant ONLY)
- FAN headerfor connecting cooling fan, allows speed adjustment and measurement
- DISP0MIPI DSI display port
- USB SLAVE portfor burning system image into Compute Module 4 eMMC variants
- RTC battery holdersupports CR1220 button cell
- RTC interruption configuration PI-RUN: CM4 will reboot on RTC interruption GN-EN: CM4 powerdown on RTC interruption D4: D4 pin is triggered on RTC interruption
- IO-VREF selection set the CM4 IO logic level as 3.3V or 1.8V
- FAN power supply selectionselect 5V or 12V power to drive the fan
- System function configurationBT_DIS: Bluetooth disabled, for CM4 with antenna variant ONLYWiFi_DIS: WiFi disabled, for CM4 with antenna variant ONLYWP_DIS: boot mode switch, ONLY be used when NOT booted from eMMC or TF card
- RTC/FAN I2C bus selectionSDA0/SCL0: I2C-10 is shared with CSI/DSIGPIO3/2: I2C-1 is shared with 40PIN header
- RTL8153USB Gigabit Ethernet chip
- EMC2301 fan controller, allows fan speed adjustment and measurement
- VL805 USB 3.0 HUB
WIKI: www.waveshare.com/wiki/CM4-DUAL-ETH-BASE
Lieferumfang
- CM4-DUAL-ETH-BASE x1
- Metal case (top and bottom) x1
- Fan-4010-PWM-12V x1
- Screwdriver x1
- Screws pack x1
- EU 12V 2A power adapter x1
Wiki
Manufacturer according to GPSR
Waveshare International Limited, World Trade Plaza south side, Fuhong Rd, Futian District, 518000 Shenzhen, China, [email protected], https://waveshare.com/
Responsible person according to GPSR
Eckstein GmbH, Am Ostbahnhof 3, 38678 Clausthal-Zellerfeld, Niedersachsen, Deutschland, [email protected], https://eckstein-shop.de