Product Description
Variant: RS232 RS485 CAN Board.
The Isolated RS232 / RS485 / CAN / CAN FD Expansion Board for Raspberry Pi adds five galvanically isolated communication channels to Raspberry Pi 4B and Raspberry Pi 5. It connects through the 40-pin GPIO header using SPI and UART. The supplied ABS enclosure supports wall mounting and installation on a standard 35 mm DIN rail.
Digital signal isolation and an isolated power supply separate the communication interfaces electrically. TVS protection, protection diodes and a resettable fuse provide additional electrical protection. Internal space accommodates further HATs and a Raspberry Pi 5 PCIe adapter board, subject to compatible dimensions and pin assignments.
Highlights
- Galvanic isolation for all RS232, RS485, CAN and CAN FD channels
- Isolated interface power without an additional isolated-side supply
- TVS protection, protection diodes and a resettable fuse
- ABS enclosure for wall mounting and 35 mm DIN rails
- Internal space for additional HATs and Raspberry Pi 5 PCIe expansion
Technical Features
- Host platforms: Raspberry Pi 4B and Raspberry Pi 5; 40-pin GPIO connection with SPI and UART
- Interfaces: 2 × RS485, 1 × RS232, 1 × CAN and 1 × CAN FD
- RS485: SC16IS752 and SP485; 300 to 921600 bit/s
- RS232: SP3232EEN connected to the Raspberry Pi UART
- CAN: MCP2515 and SN65HVD230; 5 kbit/s to 1 Mbit/s
- CAN FD: MCP2518FD and MCP2562FD; 5 kbit/s to 8 Mbit/s
- Alternative power inputs: 7 to 36 V DC screw terminal or 5 V USB-C on Pi5 Connector Adapter (B)
- Termination resistor: 120 Ω, jumper configurable
- Enclosure dimensions: 154.6 × 83.7 × 59 mm
Application Areas
- Connecting RS485 field devices to Raspberry Pi controllers
- Integrating serial RS232 equipment into industrial control systems
- Communicating with CAN and CAN FD nodes in test setups
- Installing Raspberry Pi communication nodes in control cabinets
Notes
- Raspberry Pi and PCIe adapter board are not included.
- Stacked HATs require compatible dimensions and conflict-free pin assignments.
- Select one of the two power methods; Pi5 Connector Adapter (B) enables simultaneous power for the Raspberry Pi and expansion board.
- Online documentation and Raspberry Pi Python and C examples are available.
What's Included
- RS232 RS485 CAN Board with ABS plastic case ×1
- 40PIN cable ×1
- Pi5 Connector Adapter (B) ×1
- Screws pack ×1
| Item information | Value |
|---|---|
| GTIN: | 4060137306983 |
| HAN: | 28164 |
| Category: | USB/RS/CAN/LAN |
| Operating Voltage Max. (V): | 36V |
| Operating Voltage Min. (V): | 7V |
| Compatible Host Board Models: | Raspberry Pi 4B; Raspberry Pi 5 |
| CAN Port Count: | 2 |
| CAN Standard: | CAN; CAN FD |
| Host Interface Type: | SPI + UART |
| Shipping weight: | 0,38 kg |
| Item weight: | 0,32 kg |
| Dimensions ( Length × Width × Height ): | 15,46 × 8,37 × 5,90 cm |
Waveshare International Limited, World Trade Plaza south side, Fuhong Rd, Futian District, 518000 Shenzhen, China, [email protected], https://waveshare.com/