Product Description
Variant: ESP32-S3-Touch-LCD-2.1B.
The ESP32-S3 2.1inch Capacitive Touch Round Display Development Board combines a graphical interface with wireless connectivity and connections for external peripherals. This version has a 2.5D curved touch panel. It supports HMI development and ESP32-S3 projects using LVGL. The display uses an RGB interface, while touch input connects through I2C.
External devices connect through GPIO, UART and I2C. ESP-IDF and Arduino are supported for software development. USB-C ports provide USB connectivity and programming through the integrated USB-to-UART converter. A connection for a 3.7 V lithium battery, together with charging management, supports battery-powered applications.
Highlights
- Xtensa LX7 dual-core processor operating at up to 240 MHz
- 2.4 GHz Wi-Fi and Bluetooth 5 LE with an onboard antenna
- 512 KB SRAM, 16 MB Flash and 8 MB PSRAM
- 2.1-inch capacitive touch display with 480 × 480 pixels and 262K colours
- I2C touch control with interrupt support
Technical Features
- Processor: ESP32-S3R8, Xtensa LX7, 32-bit, dual-core, up to 240 MHz
- Memory: 512 KB SRAM, 384 KB ROM, 16 MB Flash, 8 MB PSRAM
- Display: round 2.1-inch IPS LCD, 480 × 480 pixels, 262K colours
- Touchscreen: yes, capacitive single-point input, 2.5D curved surface
- Display and touch controllers: ST7701 and CST820
- Interfaces: RGB, I2C, UART, GPIO, full-speed USB, microSD
- Wireless: 802.11 b/g/n Wi-Fi at 2.4 GHz, Bluetooth 5 LE
- Motion sensor: QMI8658 with three gyroscope and three accelerometer axes
- Real-time clock: PCF85063
- Battery connection: MX1.25 2PIN for a 3.7 V lithium battery with charging management
- Development environments: ESP-IDF and Arduino
Application Areas
- Develop graphical HMI prototypes using LVGL and touch input.
- Display measurements from external I2C sensors on a round operator interface.
- Implement wirelessly connected control interfaces using Wi-Fi or Bluetooth LE.
- Prototype motion-dependent displays using the integrated six-axis sensor.
Notes
- The four-pin UART header is disabled while the USB-to-UART USB-C port is connected.
- The I2C header connects to internal devices and cannot be mapped to other functions.
- Using an external antenna through the IPEX1 connector requires resoldering a resistor.
What's Included
- 1 × ESP32-S3-Touch-LCD-2.1B
- 1 × SH1.0 12PIN cable, approximately 100 mm
- 1 × SH1.0 4PIN cable set, approximately 100 mm, 2 pieces
| Item information | Value |
|---|---|
| GTIN: | 4060137312014 |
| HAN: | 30697 |
| Category: | Development Boards |
| Resolution: | 480 × 480 |
| Touchscreen: | ja |
| Controller-IC: | ESP32-S3R8 |
| Manufacturer Part Number: | 30697 |
| Digital Interface Protocols: | I2C, UART, USB, RGB |
| Interface Type: | GPIO, UART, I2C, USB, RGB |
| CPU Architecture: | Xtensa LX7, 32-bit |
| Display Shape: | Round |
| microSD Card Slot: | Ja |
| Driver IC: | ST7701 |
| Display Technology: | IPS |
| Battery Charging Management: | Ja |
| Display Interface Type: | RGB |
| Display Resolution Height: | 480 |
| Display Resolution Width: | 480 |
| Onboard RTC: | Ja |
| SRAM Memory: | 512 |
| Supported Programming Environments: | ESP-IDF, Arduino |
| Touch Interface Type: | I2C |
| USB Device Support: | Ja |
| CPU Core Count: | 2 |
| Flash Memory: | 16 |
| PSRAM: | 8 |
| CPU Clock Frequency Max.: | 240 |
| Connector Type: | USB-C |
| Display Type: | IPS LCD |
| Wi-Fi Standard: | IEEE 802.11b/g/n |
| Wi-Fi Frequency Bands: | 2.4GHz |
| Bluetooth Version: | 5le |
| Maximum Touch Points: | 1 |
| Wireless Protocols: | Wi-Fi, Bluetooth LE |
| Wireless LAN Standard: | IEEE 802.11 b/g/n |
| Onboard IMU Sensor IC: | QMI8658 |
| Onboard IMU Axis Count: | 6 |
| Touch Controller IC: | CST820 |
| CPU Configuration: | Dual-core |
| MCU Family: | ESP32-S3 |
| MCU Series: | ESP32-S3 |
| Onboard USB-to-UART: | Ja |
| Target MCU Part Number: | ESP32-S3R8 |
| Debug/Programming Interface: | USB-to-UART |
| Display Size (inch): | 2,1 |
| Shipping weight: | 0,06 kg |
| Item weight: | 0,05 kg |
| Dimensions ( Length × Width ): | 7,18 × 7,18 cm |
Waveshare International Limited, World Trade Plaza south side, Fuhong Rd, Futian District, 518000 Shenzhen, China, [email protected], https://waveshare.com/