Product Description
Variant: ESP32-C6-Touch-AMOLED-1.43.
The ESP32-C6 1.43inch AMOLED Round Touch Display Development Board combines a circular capacitive touchscreen with wireless connectivity, audio processing and motion sensing. This version without a case is intended for integration into connected devices with graphical interfaces and voice interaction. Two microphones and a speaker connector support audio development. External sensors and modules connect through UART, I2C and expansion headers. Programming uses USB-C with ESP-IDF or Arduino IDE, while a connector for a 3.7 V lithium battery supports independent operation.
Highlights
- ESP32-C6 32-bit RISC-V processor running at up to 160 MHz
- Wi-Fi 6, Bluetooth 5 LE and IEEE 802.15.4 for Zigbee 3.0 and Thread
- 16 MB Flash plus 512 KB HP SRAM and 16 KB LP SRAM
- 1.43-inch capacitive AMOLED touchscreen with 466 × 466 pixels and 16.7 million colors
- CO5300 display driver over QSPI and FT6146 touch controller over I2C
Technical Features
- Processor: ESP32-C6, 32-bit RISC-V, one main core, up to 160 MHz
- Memory: 16 MB Flash, 512 KB HP SRAM, 16 KB LP SRAM, 320 KB ROM
- Display: circular 1.43-inch AMOLED, 466 × 466 pixels
- Image parameters: 350 cd/m² brightness, 60000:1 contrast, 178° viewing angle
- Touchscreen: yes, capacitive, FT6146
- Display driver: CO5300 with QSPI control
- Wireless: 2.4 GHz Wi-Fi 6, Bluetooth 5 LE, IEEE 802.15.4
- Interfaces: USB-C, UART, I2C, GPIO, microSD; SH1.0 4PIN connectors and two 2 × 4-pin expansion headers at 2.54 mm pitch
- Audio: dual microphones, ES7210 and ES8311, MX1.25 2PIN speaker connector
- Sensing and timekeeping: QMI8658 six-axis IMU, PCF85063 real-time clock
- Battery connector: MX1.25 2PIN for a 3.7 V lithium battery with charging and discharging support
- Development environments: ESP-IDF and Arduino IDE
Application Areas
- Develop graphical interfaces for connected devices with capacitive touch input.
- Prototype speech recognition and near-field or far-field voice wake-up using the dual microphones.
- Detect motion gestures and count steps using the accelerometer and gyroscope.
- Record measurement data on a microSD card or play stored media.
Notes
- This version is supplied without a case.
- The card slot supports FAT32-formatted microSD cards.
- The PWR button requires a driver for on/off control during battery operation.
What's Included
- 1 × ESP32-C6-Touch-AMOLED-1.43
- 1 × ESP32-C6-Touch-AMOLED-1.43
- 1 × 1217 cavity speaker, 8 Ω, 2 W
- 2 × SH1.0 4PIN cable, approximately 100 mm
| Item information | Value |
|---|---|
| GTIN: | 4060137024023 |
| HAN: | 31897 |
| Category: | Development Boards |
| Resolution: | 466 × 466 |
| Touchscreen: | ja |
| Display Size (inch): | 1.43 |
| Controller-IC: | ESP32-C6 |
| Manufacturer Part Number: | 31897 |
| Digital Interface Protocols: | USB, UART, I2C, QSPI |
| Interface Type: | USB, UART, I2C, GPIO, QSPI |
| CPU Architecture: | 32-bit RISC-V |
| Display Shape: | Round |
| IEEE 802.15.4 Support: | Ja |
| microSD Card Slot: | Ja |
| Driver IC: | CO5300 |
| Display Technology: | AMOLED |
| Onboard Audio Codec: | Ja |
| Battery Charging Management: | Ja |
| Display Interface Type: | QSPI |
| Display Resolution Height: | 466 |
| Display Resolution Width: | 466 |
| Onboard RTC: | Ja |
| SRAM Memory: | 528 |
| Supported Programming Environments: | ESP-IDF, Arduino IDE |
| Touch Interface Type: | I2C |
| USB Device Support: | Ja |
| CPU Core Count: | 1 |
| Flash Memory: | 16 |
| PSRAM: | 0 |
| CPU Clock Frequency Max.: | 160 |
| Connector Type: | USB-C, SH1.0 4PIN, MX1.25 2PIN |
| Display Type: | AMOLED |
| Wi-Fi Standard: | Wi-Fi 6 |
| Wi-Fi Frequency Bands: | 2.4GHz |
| Bluetooth Version: | 5le |
| Wireless Protocols: | Wi-Fi 6, Bluetooth LE, Bluetooth Mesh, Zigbee 3.0, Thread |
| Wireless LAN Standard: | IEEE 802.11 b/g/n/ax |
| Onboard IMU Sensor IC: | QMI8658 |
| Onboard IMU Axis Count: | 6 |
| Contrast Ratio: | 60000 |
| Touch Controller IC: | FT6146 |
| CPU Configuration: | 1 HP RISC-V core + 1 LP RISC-V core |
| MCU Family: | ESP32 |
| MCU Series: | ESP32-C6 |
| Target MCU Part Number: | ESP32-C6 |
| Debug Interface: | USB, UART |
| Debug/Programming Interface: | USB-C |
| Shipping weight: | 0,03 kg |
| Item weight: | 0,02 kg |
| Dimensions ( Length × Width × Height ): | 4,60 × 4,60 × 0,96 cm |
Waveshare International Limited, World Trade Plaza south side, Fuhong Rd, Futian District, 518000 Shenzhen, China, [email protected], https://waveshare.com/