World Trade Plaza south side, Fuhong Rd, Futian District
Shenzhen, China, 518000
[email protected]
https://waveshare.com/
Am Ostbahnhof 3
Niedersachsen
Clausthal-Zellerfeld, Deutschland, 38678
[email protected]
https://eckstein-shop.de
GTIN: | 4060137096563 |
HAN: | 27236 |
Category: | E-Ink / E-Paper |
Interface/Connector: | SPI |
Form/Type: | Raw E-Paper |
Display Size (inch): | 13,3 |
Storage Tiers: | Maintain |
Touchscreen: | Non-Touch |
Platform: | Raspberry Pi* |
Resolution: | 960x680 |
Shipping weight: | 0,20 kg |
Item weight: | 0,16 kg |
Dimensions ( Length × Width × Height ): | 28,60 × 21,20 × 1,00 cm |
13.3inch e-Paper Display (B), E-Ink Display, 960x680 pixels, Red / Black / White, SPI Communication, Partial Refresh Support, with e-Paper Driver HAT.
- Size: 13.3"
- Resolution: 960x680
- Viewing Angle: >170°
- Display Color: Red / Black / White
- Grey Scale: 2
- Communicatio: nSPI
- Display Panel: E-paper
- Experience: Paper-like
- Environment: Ambient Light Required
- Display Type: Passively Reflective
- Refreshing: Partial Refresh Support
Version Options
- 13.3inch e-Paper (B) raw display, without driver board
- 13.3inch e-Paper HAT (B) with e-Paper Driver HAT
Features
- No backlight, keeps displaying last content for a long time even when power down
- Ultra low power consumption, basically power is only required for refreshing
- Comes with development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
- Optional for e-Paper Driver HAT:
- With standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards/Jetson Nano
- Adapting SPI interface for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
- Onboard voltage translator, compatible with 3.3V / 5V MCUs
Specifications
- operating voltage: Raw display: 3.3V
- grey scale: 2
- e-Paper Driver HAT: 3.3V/5V
- interface: 3-wire SPI, 4-wire SPI
- partial refresh time: 2.9s
- display dimensions: 286.32 x 212.26 x 1.20mm
- full refresh time: 22s
- display area: 275.52 x 195.16mm
- refresh power: 75mW
- dot pitch: 0.287 x 0.287mm
- standby current: <0.01uA (almost none)
- resolution: 960 x 680 pixels
- viewing angle: >170°
- display color: red, black, white
HAT Pinout
- VCC: 3.3V/5V
- GND: Ground
- DIN: SPI MOSI pin
- CLK: SPI SCK pin
- CS: SPI chip selection, low active
- DC: Data / Command selection (high for data, low for command)
- RST: External reset, low active
- BUSY: Busy status output
- PWR: Power on/off control
WIKI:www.waveshare.com/wiki/13.3inch_e-Paper_HAT_(B)
Lieferumfang
- 13.3inch e-Paper (B) x1
- e-Paper Driver HAT + Adapter board + FFC cable x1
- RPi screws pack (2pcs) x1
- GH1.25 9PIN cable ~20cm x1
Wiki
Manufacturer according to GPSR
Waveshare International Limited, World Trade Plaza south side, Fuhong Rd, Futian District, 518000 Shenzhen, China, [email protected], https://waveshare.com/
Responsible person according to GPSR
Eckstein GmbH, Am Ostbahnhof 3, 38678 Clausthal-Zellerfeld, Niedersachsen, Deutschland, [email protected], https://eckstein-shop.de