Product Description
The RP2350 1.64inch AMOLED Display Development Board combines a touch-sensitive screen with a programmable processor, motion sensing and a real-time clock. It supports the development of compact user interfaces and motion-dependent display applications. The RP2350-Touch-AMOLED-1.64-M variant is supplied as a raw display. A USB-C connector provides programming and USB communication, while exposed GPIOs connect external components. A battery connector with charging and discharging support enables mobile applications using a 3.7 V lithium battery. Software development is supported with C/C++, MicroPython and Arduino IDE.
Highlights
- RP2350A microcontroller designed by Raspberry Pi
- Dual-core processor with selectable Arm Cortex-M33 or Hazard3 RISC-V architecture, up to 150 MHz
- 520 KB SRAM and 16 MB onboard flash memory
- USB-C connector for programming and USB communication
- 1.64-inch capacitive-touch AMOLED with QSPI and 16.7 million colours
Technical Features
- Processor: RP2350A, two Arm Cortex-M33 or two Hazard3 RISC-V cores, up to 150 MHz
- Memory: 520 KB SRAM, 16 MB W25Q128JVSIQ NOR flash
- Display: 1.64-inch AMOLED, 280 × 456 pixels, 16.7 million colours
- Display parameters: 350 cd/m² brightness, 60000:1 contrast ratio, 178° viewing angle
- Display driver: CO5300; capacitive touch controller: FT3168
- Motion sensor: QMI8658 with three accelerometer axes and three gyroscope axes
- Interfaces: QSPI, 2 × I2C, 2 × UART, USB 1.1 through USB-C, microSD card slot; touch communication through I2C
- Input/output: 17 GPIOs, 3 × 12-bit ADC, 13 controllable PWM channels
- Programmable input/output: 12 PIO state machines
- Battery connector: MX1.25 2P for a 3.7 V lithium battery, with charging and discharging support
- USB modes: device and host; programming through USB mass storage
- Programming environments: C/C++, MicroPython, Arduino IDE
Application Areas
- Compact control panels display measurements and menus on the capacitive-touch AMOLED.
- Motion-dependent displays process acceleration and angular velocity from the six-axis sensor.
- Mobile display prototypes use the lithium battery connector and charging function.
- Experimental systems evaluate the same application on Arm or RISC-V processor cores.
What's Included
- 1 × RP2350-Touch-AMOLED-1.64-M
| Item information | Value |
|---|---|
| GTIN: | 4060137313011 |
| HAN: | 31337 |
| Category: | OLED/QLED |
| Resolution: | 280 × 456 |
| Touchscreen: | ja |
| Controller-IC: | RP2350A |
| Manufacturer Part Number: | 31337 |
| Digital Interface Protocols: | QSPI, I2C, UART, USB 1.1 |
| Interface Type: | USB, QSPI, I2C, UART, ADC, PWM |
| CPU Architecture: | Arm Cortex-M33 / Hazard 3 RISC-V |
| microSD Card Slot: | Ja |
| Driver IC: | CO5300 |
| Display Technology: | AMOLED |
| Battery Charging Management: | Ja |
| Display Interface Type: | QSPI |
| Display Resolution Height: | 456 |
| Display Resolution Width: | 280 |
| Onboard RTC: | Ja |
| SRAM Memory: | 520 |
| Supported Programming Environments: | C/C++, MicroPython, Arduino IDE |
| Touch Interface Type: | I2C |
| USB Device Support: | Ja |
| USB Host Support: | Ja |
| USB Version: | 1.1 |
| CPU Core Count: | 2 |
| Flash Memory: | 16 |
| CPU Clock Frequency Max.: | 150 |
| GPIO Count: | 17 |
| Connector Type: | USB-C |
| Display Type: | AMOLED capacitive touch display |
| Onboard IMU Sensor IC: | QMI8658 |
| Onboard IMU Axis Count: | 6 |
| PIO State Machine Count: | 12 |
| Contrast Ratio: | 60000 |
| Touch Controller IC: | FT3168 |
| CPU Configuration: | 2 × Arm Cortex-M33 or 2 × Hazard3 RISC-V |
| MCU Family: | RP2350 |
| MCU Series: | RP2350 |
| Target MCU Part Number: | RP2350A |
| Debug/Programming Interface: | USB mass storage |
| Display Size (inch): | 1.64 |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Dimensions ( Length × Width ): | 4,40 × 2,91 cm |
Waveshare International Limited, World Trade Plaza south side, Fuhong Rd, Futian District, 518000 Shenzhen, China, [email protected], https://waveshare.com/