SparkFun MyoWare 2.0 Muscle Sensor Development Kit

+ 2

show

Sparkfun

SparkFun MyoWare 2.0 Muscle Sensor Development Kit

Name: SparkFun MyoWare 2.0 Muscle Sensor Development Kit
Brand: Sparkfun
SKU: SF21269
Price: 199.95 EUR
Availability: OutOfStock

SKU: SF21269

199,95 €

per pcs

incl. 19% VAT plus

Net: 168,03 €

Choose tax zone / country of delivery

Notify me when available

Orderable, information on delivery time as follows, otherwise please enquire.

Product Information

Product safety information

Manufacturer information:

SparkFun Electronics Inc
Dry Creek Parkway 6333
Colorado
Niwot, Vereinigte Staaten, 80583
[email protected]
https://eckstein-shop.de/SparkFun-Marken

Responsible person:

Eckstein GmbH
Am Ostbahnhof 3
Niedersachsen
Clausthal-Zellerfeld, Deutschland, 38678
[email protected]
https://eckstein-shop.de

Dimensions and Weight
GTIN:	4060137084133
HAN:	KIT-21269
Category:	Sensors
Storage Tiers:	Maintain
Shipping weight:	0,72 kg
Item weight:	0,60 kg
Dimensions ( Length × Width × Height ):	18,50 × 13,00 × 5,00 cm

Product Description

The MyoWare® 2.0 Muscle Sensor Development Kit is an Arduino-compatible, all-in-one electromyography (EMG) sensor kit that provides you with all the boards from the MyoWare 2.0 ecosystem to test out different configurations for your application. Depending on your configuration, you can visualize the muscles in action with the MyoWare 2.0 LED Shield or read the analog output using an Arduino-compatible microcontroller! Simply snap on a MyoWare 2.0 Shield, add some EMG sensor pads, attach the sensor to a muscle group, and flex!

The kit also includes a mini screwdriver to easily remove shields, USB A to C cable to recharge the 40mAh LiPo batteries or connecting your microcontroller to a computer, MyoWare 2.0 Reference Cable to connect to large muscle groups, sensor cable to connect to muscle groups away from the sensor, 3.5mm TRS-to-TRS cable to easily connect the MyoWare 2.0 ecosystem to an Arduino-compatible development board using an Uno R3 footprint, and RedBoard Plus.

The MyoWare 2.0 Muscle Sensor included in this kit has been redesigned from the ground up with a new easy-to-use, compact design and upgraded with the latest and greatest chipset improving sensor performance and reliability. The sensor measures muscle activity through the electric potential of the muscle, commonly referred to as surface electromyography (EMG or sEMG for short). When your brain tells your muscle to flex, it sends an electrical signal to your muscle to start recruiting motor units (the bundles of muscle fibers that generate the force behind your muscles).

This kit is constructed to follow the standalone examples using the MyoWare 2.0 Power Shield and LED Shield; and read the output voltage from a single muscle sensor using an Arduino-compatible microcontroller featured in the MyoWare 2.0 Muscle Sensor Guide. For a basic setup without a microcontroller, check out the MyoWare 2.0 Muscle Sensor Basic Kit. The basic kit includes the bare minimum from the MyoWare 2.0 ecosystem to visualize your muscles in action without programming.

Note: This item may take longer to process due to the battery installed in the equipment and therefore does not qualify for same-day shipping policy. Additionally, these batteries can not be shipped via Ground or Economy methods to Alaska or Hawaii. Sorry for any inconvenience this may cause.

Boards in the MyoWare 2.0 ecosystem are not intended for use in the diagnosis of disease or other conditions, or in the cure, mitigation treatment, or prevention of disease, in a man or other animals.

Includes:

1x MyoWare 2.0 Muscle Sensor (Version 2.0.4)
1x MyoWare 2.0 Power Shield
1x MyoWare 2.0 LED Shield
1x MyoWare 2.0 Link Shield
1x TRS 3.5mm Cable
1x MyoWare 2.0 Arduino Shield
1x Reversible USB A to C Cable - 2m
1x Disposable Surface EMG/ECG/EKG Electrode - 24mm (10 pack)
1x MyoWare 2.0 Cable Shield
1x Sensor Cable - Electrode Pads (3 connector)
1x MyoWare 2.0 Reference Cable
1x SparkFun Mini Screwdriver
1x SparkFun RedBoard Plus

Note: This is a more advanced development kit to get started with the muscle sensor and includes the minimum parts to get started using one muscle sensor. Up to five additional muscle sensors can be added to this kit using five corresponding link shields & TRS 3.5mm cables listed above.

MyoWare 2.0 Muscle Sensor Features:

Wearable Design
Supply Voltage
- Minimum: +2.27V
- Typically: +3.3V to +5V
- Maximum: +5.47V
Input Bias Current
- 250pA, max 1nA
Reverse Polarity Protection
Three Output Modes
- Raw EMG
- Rectified
- Envelope
Expandable via Shields
MyoWare® 2.0 Muscle Sensor Form Factor
- 3x Female Snap Pins (Power and EMG Envelope Output)
- 3x Male Snap Pins (Input Electrodes)
LED Indicators
- VIN
- ENV
Reference Electrode Jumper
Specially Designed For Microcontrollers
Adjustable Gain
Board Dimensions: 37.57mm x 35.90mm (1.48” x 1.41”)

Write the first review for this item and help others make a purchase decision!

Contact data

First name

Last name

E-Mail*

Wiki

Manufacturer according to GPSR
SparkFun Electronics Inc, Dry Creek Parkway 6333, 80583 Niwot, Colorado, Vereinigte Staaten, [email protected], https://eckstein-shop.de/SparkFun-Marken
Responsible person according to GPSR
Eckstein GmbH, Am Ostbahnhof 3, 38678 Clausthal-Zellerfeld, Niedersachsen, Deutschland, [email protected], https://eckstein-shop.de

Cookiename	Beispielinhalt	Ablaufzeit
_ga_*	deleted	730 Tage
_ga	GA1.1.8643343795.1726666186	730 Tage

SparkFun MyoWare 2.0 Muscle Sensor Development Kit

Dimensions and Weight

Wiki

SparkFun MyoWare 2.0 Muscle Sensor Development Kit

Service package

Services for business customers