Seeed Studio SenseCAP S2110 Sensor Builder Open-Source Tool to Build RS485 Sensors with Grove

Seeed Studio SenseCAP S2110 Sensor Builder Open-Source Tool to Build RS485 Sensors with Grove

33,95 € (Net 28,53 € )

incl. 19% VAT , plus (XL)

Choose tax zone / country of delivery

Orderable, information on delivery time as follows, otherwise please enquire.

SKU: SS92986
GTIN: 4060137091278
Category: CAN/232/485
Manufacturers: Seeed Studio
MPN: 114992986
Storage Tiers: Maintain

SenseCAP S2110 Sensor Builder has Seeed Studio XIAO RP2040 as the dual-core ARM Cortex M0+ processor, and has one Grove and one RS485 connector, enabling developers to connect with 500+ Grove sensors and various MODBUS RS485 sensors to develop custom industrial-grade MODBUS RS485 sensors for various IoT applications.

For the LoRaWAN application, developers could easily connect it with a SenseCAP LoRaWAN Data Logger to transfer the data to SenseCAP Cloud, which only takes a 5-minute simple BLE configuration in SenseCAP Mate App. Clear data results and further analysis could be easily obtained from SenseCAP Dashboard and SenseCAP Mate App. IoT platforms such as Helium, TTN, LORIOT, etc. are also supported.

The product comes with an IP66 industrial-grade enclosure, mounting pads, and screws set, which enables you to deploy the sensor outdoors easily and safely.

SenseCAP S2110 Sensor Builder builds the bridge between Grove and industrial-grade Sensor. It makes up for the defects of insufficient sensor types and the high cost of existing industrial-grade IoT sensors. It enables developers to build their own MODBUS RS485 sensors according to a specific IoT application. It also builds the hardware bridge for developers to quickly connect the Grove sensors to the SenseCAP Cloud and build IoT applications at a low cost.

Part List

1x SenseCAP S2110 Sensor Builder
1x Mounting Pad
1x Screws Set
1x RS-485 Cable

*SenseCAP S2100 LoRaWAN Data Logger and Grove Sensor are not included in this product.

FAQs:

1. Is the LoRaWAN network coverage necessary when using the SenseCAP S2110?

If you want to build a LoRaWAN sensor with SenseCAP S2110, ideally, yes. LoRaWAN enables your solutions with ultra-low power consumption and wide-range transmission. When connecting with the SenseCAP S2100 Data Logger, this device can be connected to the local LoRaWAN network if there's network coverage nearby. Also, you can manage to a build LoRaWAN network on your own by deploying LoRaWAN gateways.

2. What APP can be used when binding the SenseCAP S2110 and managing the device?

The SenseCAP Mate can be used to bind the gateway to the SenseCAP Cloud and manage the device. It is a powerful tool for the usage of the SenseCAP S2110 Sensor Builder.