Product Description
Cobra Flex Universal Modular Drive-by-Wire Chassis is an electronically controlled platform for developing custom mobile robots. Its metal body combines hub motors with independent suspension and provides internal space for a battery set and a suitably sized host computer. Raspberry Pi or Jetson Orin series computers handle higher-level tasks and communicate with the chassis through USB or UART. A separate battery set is required for power. Open-source code and profile rails support custom software, mechanical assemblies and peripheral integration.
Highlights
- Modular chassis with shock absorption and fully open-source code for further development.
- Support for multiple host platforms, including Raspberry Pi and Jetson Orin.
- Four bus hub motors with integrated FOC control.
- Simultaneous charging and power output.
- CNC-machined metal independent suspension and two 1020 profile rails for expansion.
Technical Features
- Dimensions: 235.25 × 173 × 101.24 mm; chassis height: 34.24 mm.
- Chassis weight: 2375 ± 5 g.
- Drive: four driven wheels; motor no-load speed: 180 rpm at 12 V.
- Wheelbase: 154 mm; wheel diameter: 74.5 mm; four-wheel independent suspension.
- Differential steering; minimum turning radius: 0 m.
- Maximum speed: 0.53 m/s at 12 V; payload: 12 kg; maximum climbing angle: 30°.
- Controller basis: ESP32 with separation of power and signal electronics.
- Interfaces: USB, UART, HTTP, LIN bus, TTL, RS485, Wi-Fi and Bluetooth.
- Power: directly from the battery set; recommended: 3s2p 18650 lithium battery set; charging jack: DC 5.5 × 2.1 mm.
- Expansion: two 1020 aluminum profile rails with 110 mm spacing.
- Protection rating: IP32; operating temperature: 0 to 40 °C.
Application Areas
- Develop custom motion control with a host computer connected through USB or UART.
- Test mobile assemblies on uneven ground using independent suspension.
- Integrate peripherals and modular mounting assemblies on the profile rails.
Notes
- The battery set is not included; allow sufficient internal space for the battery and host computer.
- Speed and motor rpm depend on voltage; in-place rotation depends on payload and ground friction.
- Wi-Fi is intended only for short-distance debugging.
- The supply voltage must match any connected RSBL bus servos.
What's Included
- 1 × Cobra Flex
- 1 × USB Type-A male to Type-A female cable, approximately 1.2 m
- 1 × (optional) 12.6 V, 2 A power supply
- 1 × Packing box
- 1 × Accessory pack
| Item information | Value |
|---|---|
| GTIN: | 4060137312977 |
| HAN: | 31326 |
| Category: | 4WD |
| Manufacturer Part Number: | 31326 |
| Application Interface: | USB, UART, HTTP |
| Target Platform: | Raspberry Pi, Jetson Orin |
| Wheel Count: | 4 |
| Drive Configuration: | 4wd |
| Locomotion Type: | wheeled |
| Controller Count: | 1 |
| Chassis Material: | Metall |
| Open-Source Supported: | Ja |
| Expandable Design: | Ja |
| Shipping weight: | 3,06 kg |
| Item weight: | 2,55 kg |
| Dimensions ( Length × Width × Height ): | 23,53 × 17,30 × 10,12 cm |
Waveshare International Limited, World Trade Plaza south side, Fuhong Rd, Futian District, 518000 Shenzhen, China, [email protected], https://waveshare.com/