Pololu Tic T825 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)

Pololu Tic T825 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)

The Tic T825 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC). This version incorporates a TI DRV8825 driver and ships with soldered header pins and terminal blocks. It can operate from 8.2 V to 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow.

94,95 € (Net 79,79 €)

Top

incl. 19% VAT , plus (M)

Choose tax zone / country of delivery

pack

Product customisation & sourcing & PCBA one-stop service are available with us.

Request personal offer!

Orderable, information on delivery time as follows, otherwise please enquire.
Delivery time: 6 - 8 Workdays (Other countries)

SKU: PO3130
GTIN: 4060137035852
Category: Controller
Manufacturers: Pololu
MPN: 3130
Storage Tiers: Maintain

Overview
The Tic T825 is based on the DRV8825 IC from Texas Instruments. It can operate from 8.2 V to 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (absolute maximum is 2.5 A per phase). It has reverse protection for motor power supplies up to 40 V. This version is sold with connectors soldered so no soldering is necessary to use it. A version is also available with header pins and terminal blocks included but not soldered.

Dimensions

Size: 1.50″ × 1.05″ × 0.47″
Weight: 8.5 g

General specifications

Model: Tic T825
Motor driver: DRV8825
Control interface: USB; non-inverted TTL serial; I²C; RC servo pulses; analog voltage; quadrature encoder
Minimum operating voltage: 8.5 V
Maximum operating voltage: 45 V (Reverse voltage protection only works up to 40 V.)
Continuous current per phase: 1.5 A (Without a heat sink or forced air flow.）
Maximum current per phase: 2.5 A (With sufficient additional cooling.)
Maximum step rate: 50000 PPS
Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32
Reverse voltage protection?: Y (To -40 V. Connecting supplies over 40 V in reverse can damage the device.)
Connectors soldered?: Y

Identifying markings