Pololu Adjustable 9-30V Step-Up Step-Down Spannungsregler S1

+ 1

show

Pololu Adjustable 9-30V Step-Up Step-Down Spa

Pololu

Pololu Adjustable 9-30V Step-Up Step-Down Spannungsregler S18V20AHV

Name: Pololu Adjustable 9-30V Step-Up Step-Down Spannungsregler S18V20AHV
Brand: Pololu
SKU: PO2573
Price: 43.42 EUR
Availability: InStock

Item No.: PO2573

HAN: 2573

EAN: 4060137015632

HS Code: 8504409090

Herkunftsland: US

Lagerstufe: Maintain

43,42 €

per pack

incl. 19% VAT plus (M)

Net: 36,49 €

Choose tax zone / country of delivery

This powerful step-up/step-down regulator efficiently produces an adjustable 9V to 30V output from input voltages between 3V and 30V while allowing a typical output current of up to 2A when the input voltage is close to the output voltage and offering typical efficiencies of 80% to 90%. Its ability to convert both higher and lower input voltages makes it useful for applications where the power supply voltage can vary greatly, as with batteries that start above but discharge below the regulated voltage. More product details

Product Description

Overview

These step-up/step-down regulators take an input voltage from 3 V to 30 V and increase or decrease it as necessary to produce an adjustable 4 V to 12 Vor 9 to 30 V output, depending on the version. They are switching regulators (also called switched-mode power supplies (SMPS) or DC-to-DC converters) with a single-ended primary-inductor converter (SEPIC) topology, and they have a typical efficiency between 80% and 90%. The available output current is a function of the input voltage, output voltage, and efficiency (see the Typical Efficiency and Output Current section below), but it will be around 2 A when the input voltage is close to the output voltage.

The S18V20x regulator family consists of the two adjustable-output versions mentioned above along with four versions that output a fixed 5 V, 6 V, 9 V, or 12 V. The different versions of the board all look very similar, so the bottom silkscreen includes a blank space where you can add your own distinguishing marks or labels. This product page applies to both adjustable-output versions of the S18V20x family.

The flexibility in input voltage offered by these regulators is especially well-suited for battery-powered applications in which the battery voltage begins above the desired output voltage and drops below the target as the battery discharges. Without the typical restriction on the battery voltage staying above the required voltage throughout its life, new battery packs and form factors can be considered. For example:

A 4-cell battery holder, which might have a 6 V output with fresh alkalines or a 4.0 V output with partially discharged NiMH cells, can be used with the 5V version of this regulator to power a 5 V circuit.
A disposable 9 V battery powering a 5V circuit can be discharged to under 3 V instead of cutting out at 6 V, as with typical linear or step-down regulators.
The 6V version of this regulator can be used to enable a wide range of power supply options for a hobby servo project.

The no-load quiescent will typically be between 1 mA and 5 mA for most combinations of input and output voltages, though the combination of a very high output voltage and a very low input voltage (e.g. when boosting from 3 V in to 24 V out) can result in quiescent currents on the order of a few dozen milliamps.

The ENABLE pin can be used to put the board in a low-power state that reduces the quiescent current to between 10 and 20 µA per volt on VIN (e.g. approximately 30 µA with 3 V in and 500 µA with 30 V in).

This regulator has built-in reverse-voltage protection, over-current protection, thermal shutdown (which typically activates at 165°C), and an under-voltage lockout that causes the regulator to turn off when the input voltage is below 2.5 V (typical).

For similarly powerful boost-only regulators, consider our U3V50x regulator family, which are typically more appropriate if you know that your input voltage will always be lower than your output voltage.

Features

Input voltage: 2.9 V to 32 V¹
Output adjustable from 4 V to 12 V or 9 V to 30 V
Typical maximum continuous output current: 2 A (when input voltage is close to the output voltage; the Typical Efficiency and Output Current section below shows how the achievable continuous output current depends on input and output voltages)
Integrated reverse-voltage protection (up to 30 V), over-current protection, over-temperature shutoff, and under-voltage lockout
Typical efficiency of 80% to 90%, depending on input voltage, output voltage, and load
Four mounting holes for #2 or M2 screws
Compact size: 1.7" × 0.825" × 0.38" (43 × 21 × 10 mm)
Smaller holes for 0.1" header pins and larger holes for terminal blocks offer several options for connecting to the board

¹ 32 V is the absolute maximum operating voltage; the recommended maximum operating voltage is 30 V, which is the limit of the reverse voltage protection.

Technical documents / Downloads

BedienungsanleitungManualDownload

Dimensions and Weight
Item information	Value
GTIN:	4060137015632
HAN:	2573
Category:	Step-Up/-Down
Regulator-Function:	Step Down/Step Up
Output-Type:	adjustable
Operating Voltage max.:	32V
Operating Voltage min.:	2.9V
Quiescent Current max.:	25mA
Output Voltage max.:	30V
Output Voltage min.:	9V
Output Current max.:	2000mA
Shipping weight:	0,01 kg
Item weight:	0,01 kg
Dimensions ( Length × Width × Height ):	2,10 × 4,40 × 1,00 cm

Write the first review for this item and help others make a purchase decision!

Manufacturer according to GPSR
Pololu Corporation, Pilot Rd. 920, 89119 Las Vegas, Nevada, Vereinigte Staaten, [email protected], https://www.pololu.com/