Pololu MP6550 Single Brushed DC Motor Driver Carrier

Pololu MP6550 Single Brushed DC Motor Driver Carrier

5,95 € (Net 5,00 € )

In stock

incl. 19% VAT , plus (S)

Choose tax zone / country of delivery

pcs

Product customisation & sourcing & PCBA one-stop service are available with us.

Request personal offer!

Available immediately
Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

SKU: PO4733
GTIN: 4060137082535
Category: Controller
Manufacturers: Pololu
MPN: 4733
Storage Tiers: Tier3

The MP6550 from Monolithic Power Systems (MPS) is an H-bridge motor driver IC that can be used for bidirectional control of one brushed DC motor at 1.8 V to 22 V. It can supply up to about 1.7 A continuously and features configurable current sensing and current limiting. Since this board is a carrier for the MP6550. The board ships populated with all of its SMD components, including the MP6550.

H-bridge motor driver: can drive one DC motor
Motor supply voltage: 1.8 V to 22 V
Logic supply voltage: 1.8 V to 5 V
Output current: up to 1.7 A continuous; operation at low motor and logic supply voltages reduces the maximum continuous output current
Current control limits peak current to 2.5 A by default (this limit can be adjusted)
Under-voltage lockout and protection against over-current and over-temperature
Carrier board adds reverse-voltage protection up to 20 V
Compact size (0.5?×0.6?)
Weight: 0.5 g. Without included hardware.

General specifications

Motor driver: MP6550
Motor channels: 1
Minimum operating voltage: 1.8 V
Maximum operating voltage: 22 V
Continuous output current per channel: 1.7 A
Peak output current per channel: 2.5 A. Default current limit determined by on-board configuration resistor.
Current sense: 0.2 V/A. Determined by on-board configuration resistor.
Maximum PWM frequency: 100 kHz
Minimum logic voltage: 1.8 V
Maximum logic voltage: 5 V
Reverse voltage protection?: Y. Note: Reverse voltage protection only works up to 20 V.
Header pins soldered?: N