Pololu Jrk G2 21v3 USB Motor Controller with Feedback (Partial Kit) 3142

Pololu

Pololu Jrk G2 21v3 USB Motor Controller with Feedback (Partial Kit) 3142

Name: Pololu Jrk G2 21v3 USB Motor Controller with Feedback (Partial Kit) 3142
Brand: Pololu
SKU: PO3142
Price: 64.50 EUR
Availability: InStock

Art.-Nr.: PO3142

64,50 €

pro Pack

inkl. 19% USt. zzgl.

Netto: 54,20 €

Auswahl Steuerzone / Lieferland

Produktanpassung & Sourcing & PCBA One-stop Service sind bei uns erhältlich.

Persönliches Angebot anfordern!

Lieferbar

Lieferfrist: ca. 3 Wochen Versandinfo

Produktinformationen

Angaben zur Produktsicherheit

Herstellerinformationen:

Pololu Corporation
Pilot Rd. 920
Nevada
Las Vegas, Vereinigte Staaten, 89119
[email protected]
https://www.pololu.com/

verantwortliche Person:

Eckstein GmbH
Am Ostbahnhof 3
Niedersachsen
Clausthal-Zellerfeld, Deutschland, 38678
[email protected]
https://eckstein-shop.de

Maße und Gewicht
GTIN:	4060137033537
HAN:	3142
Kategorie:	Jrk Motor Controllers with Feedback
Versandgewicht:	0,01 kg
Artikelgewicht:	0,01 kg
Abmessungen ( Länge × Breite × Höhe ):	3,00 × 2,50 × 0,80 cm

Produktbeschreibung

Overview

With integrated support for analog voltage or tachometer (frequency) feedback, the second-generation G2 family of Jrk motor controllers makes it easy to add closed-loop control of speed or position (but not both!) of a single brushed DC motor to a variety of projects. These versatile, general-purpose modules support five different control interfaces: USB for direct connection to a computer, TTL serial and I²C for use with a microcontroller, RC hobby servo pulses for use in an RC system, and analog voltages for use with a potentiometer or analog joystick. They also offer many settings that can be configured using our free configuration software utility for Windows, Linux, and macOS. This software simplifies initial setup of the device and allows for in-system testing and monitoring of the controller via USB (a micro-B USB cable is required to connect the Jrk G2 to a computer).

Features

Easy open-loop or closed-loop control of one brushed DC motor
A variety of control interfaces:
- USB for direct connection to a computer
- TTL serial operating at 5 V for use with a microcontroller
- I²C for use with a microcontroller
- RC hobby servo pulses for use in an RC system
- Analog voltage for use with a potentiometer or analog joystick
Feedback options:
- Analog voltage (0 V to 5 V), for making a closed-loop servo system
- Frequency, for closed-loop speed control using pulse counting (for higher-frequency feedback) or pulse timing (for lower-frequency feedback)
- None, for open-loop speed control
- Note: the Jrk does not support using quadrature encoders for position control
Ultrasonic 20 kHz PWM for quieter operation (can be configured to use 5 kHz instead)
Simple configuration and calibration over USB with free configuration software utility (for Windows, Linux, and macOS)
Configurable parameters include:
- PID period and PID coefficients (feedback tuning parameters)
- Maximum current
- Maximum duty cycle
- Maximum acceleration and deceleration
- Error response
- Input calibration (learning) for analog and RC control
Optional CRC error detection eliminates communication errors caused by noise or software faults
Reversed-power protection
Field-upgradeable firmware
Optional feedback potentiometer disconnect detection

Dimensions

Size:	1.2? × 1.0? × 0.47?
Weight:	7.5 g

General specifications

Motor channels:	1
Control interface:	USB; non-inverted TTL serial; I²C; RC servo pulses; analog voltage
Minimum operating voltage:	4.5 V²
Maximum operating voltage:	28 V³
Continuous output current per channel:	2.6 A⁴
Maximum PWM frequency:	20 kHz
Reverse voltage protection?:	Y
Version:	G2 21v3 (28 V max, 2.6 A max continuous)
Connectors soldered?:	N

Notes:

Without included hardware.
Powering the Jrk G2 21v3 with a supply voltage between 4.5 V and 5.5 V might cause its logic voltage to be lower than normal, which could affect operation. See the user’s guide for more information.
Transient operation (< 500 ms) up to 40 V.
Typical results at room temperature running at 90% duty cycle with VIN > 8 V. Operation from 4.5 V to 8 V reduces maximum current output.

Package List

1x Jrk G2 21v3 USB Motor Controller with Feedback(Partial Kit)

1x 0.1? breakaway male header strip

2x 2-pin 3.5mm terminal blocks

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufentscheidung

User’s Guide

Jrk G2 Software and Drivers for Windows

Jrk G2 Software for Linux (x86)

Jrk G2 Software for Linux (Raspberry Pi)

Jrk G2 Software for macOS

Dimension

Hersteller gemäß GPSR
Pololu Corporation, Pilot Rd. 920, 89119 Las Vegas, Nevada, Vereinigte Staaten, [email protected], https://www.pololu.com/
Verantwortliche Person gemäß GPSR
Eckstein GmbH, Am Ostbahnhof 3, 38678 Clausthal-Zellerfeld, Niedersachsen, Deutschland, [email protected], https://eckstein-shop.de