Pololu Jrk G2 18v27 USB Motor Controller with Feedback 3148

Pololu

Pololu Jrk G2 18v27 USB Motor Controller with Feedback 3148

Name: Pololu Jrk G2 18v27 USB Motor Controller with Feedback 3148
Brand: Pololu
SKU: PO3148
Price: 178.44 EUR
Availability: InStock

SKU: PO3148

GTIN:>4060137033469

HAN: 3148

Category: Jrk Motor Controllers with Feedback

178,44 €

per pack

incl. 19% VAT plus

Net: 149,95 €

Choose tax zone / country of delivery

From

Unit price / pack

178,44 € (Net: 149,95 €)

164,16 € (Net: 137,95 €)

151,03 € (Net: 126,92 €)

Product customisation & sourcing & PCBA one-stop service are available with us.

Request personal offer!

Available immediately

Delivery time: 7 - 9 Workdays (DE - int. shipments may differ)

Product Information

Product safety information

Manufacturer information:

Pololu Corporation
Pilot Rd. 920
Nevada
Las Vegas, Vereinigte Staaten, 89119
[email protected]
https://www.pololu.com/

Responsible person:

Eckstein GmbH
Am Ostbahnhof 3
Niedersachsen
Clausthal-Zellerfeld, Deutschland, 38678
[email protected]
https://eckstein-shop.de

Dimensions and Weight
GTIN:	4060137033469
HAN:	3148
Category:	Jrk Motor Controllers with Feedback
Shipping weight:	0,02 kg
Item weight:	0,02 kg
Dimensions ( Length × Width × Height ):	3,60 × 3,00 × 1,10 cm

Product Description

Overview

With integrated support for analog voltage or tachometer (frequency) feedback, the second-generation G2 family of Jrk motor controllers makes it easy to add closed-loop control of speed or position (but not both!) of a single brushed DC motor to a variety of projects. These versatile, general-purpose modules support five different control interfaces: USB for direct connection to a computer, TTL serial and I²C for use with a microcontroller, RC hobby servo pulses for use in an RC system, and analog voltages for use with a potentiometer or analog joystick. They also offer many settings that can be configured using our free configuration software utility for Windows, Linux, and macOS. This software simplifies initial setup of the device and allows for in-system testing and monitoring of the controller via USB (a micro-B USB cable is required to connect the Jrk G2 to a computer).

Main features of the Jrk G2 family

Easy open-loop or closed-loop control of one brushed DC motor
A variety of control interfaces:
- USB for direct connection to a computer
- TTL serial operating at 5 V for use with a microcontroller
- I²C for use with a microcontroller
- RC hobby servo pulses for use in an RC system
- Analog voltage for use with a potentiometer or analog joystick
Feedback options:
- Analog voltage (0 V to 5 V), for making a closed-loop servo system
- Frequency, for closed-loop speed control using pulse counting (for higher-frequency feedback) or pulse timing (for lower-frequency feedback)
- None, for open-loop speed control
- Note: the Jrk does not support using quadrature encoders for position control
Ultrasonic 20 kHz PWM for quieter operation (can be configured to use 5 kHz instead)
Simple configuration and calibration over USB with free configuration software utility (for Windows, Linux, and macOS)
Configurable parameters include:
- PID period and PID coefficients (feedback tuning parameters)
- Maximum current
- Maximum duty cycle
- Maximum acceleration and deceleration
- Error response
- Input calibration (learning) for analog and RC control
Optional CRC error detection eliminates communication errors caused by noise or software faults
Reversed-power protection
Field-upgradeable firmware
Optional feedback potentiometer disconnect detection
Arduino library makes it easy to get started using these controllers with an Arduino or compatible board
Comprehensive user’s guide

The Jrk G2 18v27 operates from 6.5 V to 30 V and can deliver a continuous output current of 27 A without a heat sink. Note that 30 V is the absolute maximum for this controller; the maximum recommended operating voltage is 24 V, and the maximum recommended nominal battery voltage is 18 V. For applications using higher voltages (such as 24 V batteries), we recommend the higher-voltage Jrk G2 24v13 or Jrk G2 24v21.

If you need to identify which version you have, you can just plug it into a computer through USB and the Jrk software will tell you. For quick visual identification without a computer, you can distinguish this version from the identically sized Jrk G2 24v21 by the number 150 on top of the tall silver electrolytic capacitors.

Dimensions

Size:1.2? × 1.4? × 0.42?¹
Weight:10g¹

General specifications

Motor channels:1
Control interface:
- USB; non-inverted TTL serial; I²C;
- RC servo pulses; analog voltage
Minimum operating voltage:6.5 V
Maximum operating voltage:30V²
Continuous output current per channel:27A³
Maximum PWM frequency:20 kHz
Reverse voltage protection?:Y
Version:G2 18v27 (30 V max, 27 A max continuous)
Connectors soldered?:N

Identifying markings

PCB dev codes:umc04a
Other PCB markings:0J10858, blank white box

Notes:

1.Without included hardware.
2.Absolute maximum; higher voltages can permanently destroy the motor driver. Recommended maximum is approximately 24 V, which leaves a safety margin for ripple voltage on the supply line. Not recommended for use with 24V batteries.
3.Typical results at room temperature running at 90% duty cycle.

Write the first review for this item and help others make a purchase decision!

User Guide

Dimension

Manufacturer according to GPSR
Pololu Corporation, Pilot Rd. 920, 89119 Las Vegas, Nevada, Vereinigte Staaten, [email protected], https://www.pololu.com/
Responsible person according to GPSR
Eckstein GmbH, Am Ostbahnhof 3, 38678 Clausthal-Zellerfeld, Niedersachsen, Deutschland, [email protected], https://eckstein-shop.de

Cookiename	Beispielinhalt	Ablaufzeit
_ga_*	deleted	730 Tage
_ga	GA1.1.8643343795.1726666186	730 Tage

Pololu Jrk G2 18v27 USB Motor Controller with Feedback 3148

Dimensions and Weight

User Guide

Dimension

Pololu Jrk G2 18v27 USB Motor Controller with Feedback 3148

Service package

Services for business customers