Pololu High-Power Simple Motor Controller G2 24v19

Pololu

Pololu High-Power Simple Motor Controller G2 24v19

Name: Pololu High-Power Simple Motor Controller G2 24v19
Brand: Pololu
SKU: PO1367
Price: 156.95 EUR
Availability: InStock

SKU: PO1367

156,95 €

per pack

incl. 19% VAT plus

Net: 131,89 €

Choose tax zone / country of delivery

Product customisation & sourcing & PCBA one-stop service are available with us.

Request personal offer!

Available immediately

Delivery time: ca. 3 weeks (DE - int. shipments may differ)

Product Information

Product safety information

Manufacturer information:

Pololu Corporation
Pilot Rd. 920
Nevada
Las Vegas, Vereinigte Staaten, 89119
[email protected]
https://www.pololu.com/

Responsible person:

Eckstein GmbH
Am Ostbahnhof 3
Niedersachsen
Clausthal-Zellerfeld, Deutschland, 38678
[email protected]
https://eckstein-shop.de

Dimensions and Weight
GTIN:	4060137053078
HAN:	1367
Category:	DC Motor Driver
Storage Tiers:	Maintain
Shipping weight:	0,02 kg
Item weight:	0,01 kg
Dimensions ( Length × Width × Height ):	4,30 × 3,00 × 1,10 cm

Product Description

This powerful motor controller makes basic control of a brushed DC motor easy, with quick configuration over USB using our free software. It supports five control interfaces: USB, TTL serial, I2C, analog voltage (potentiometer), and hobby radio control (RC). This version offers a wide 6.5 V to 40 V operating range and can deliver continuous output currents up to 19 A without a heat sink. Male headers and terminal blocks are included but not soldered, allowing for custom installations.

The Simple Motor Controllers are versatile, general-purpose single-channel motor controllers for brushed, DC motors. Wide operating voltage ranges and the ability to deliver up to several hundred watts in a small form factor make these controllers suitable for many motor control applications. With a variety of supported interfaces—USB for direct connection to a computer, TTL serial and I2C for use with embedded systems, RC hobby servo pulses for use as an RC-controlled electronic speed control (ESC), and analog voltages for use with a potentiometer or analog joystick—and a wide array of configurable settings, these motor controllers make it easy to add basic control of brushed DC motors to a variety of projects. A free configuration utility for Windows simplifies initial setup of the device and allows for in-system testing and monitoring of the controller via USB.

The SMC G2 18v25 operates from 6.5 V to 30 V and can deliver a continuous output current of 25 A without a heat sink. Note that 30 V is the absolute maximum for this controller; the maximum recommended operating voltage is 24 V, and the maximum recommended nominal battery voltage is 18 V. For applications using higher voltages (such as 24 V batteries), we recommend the higher-voltage SMC G2 24v12 or SMC G2 24v19.

If you need to identify which version you have, you can just plug it into a computer through USB and the SMC software will tell you. For quick visual identification without a computer, you can distinguish this version from the identically sized SMC G2 24v19 by the number 150 on top of the tall silver electrolytic capacitors.

This version has header pins and terminal blocks included but not soldered, so soldering is required to use it.

Dimensions (Without included hardware)

Size: 1.7″ × 1.2″ × 0.42″
Weight: 9.7 g

General specifications

Motor channels: 1
Control interface:
- USB
- non-inverted TTL serial
- I2C
- RC servo pulses
- analog voltage. Autodetects baud rates between 1200 and 500,000 bps, or can be set to any fixed baud rate in this range.
Minimum operating voltage: 6.5 V
Maximum operating voltage: 40 V
Continuous output current per channel: 19 A. Typical results at room temperature without a heat sink.
Maximum PWM frequency: 22.5 kHz
Maximum logic voltage: 3.3 V. All digital inputs are 5V tolerant.
Reverse voltage protection?: Y
Version: G2 24v19 (40 V max, 19 A max continuous)
Connectors soldered?: N

Write the first review for this item and help others make a purchase decision!

User's Guide

Software and Drivers for Windows

Dimension

Manufacturer according to GPSR
Pololu Corporation, Pilot Rd. 920, 89119 Las Vegas, Nevada, Vereinigte Staaten, [email protected], https://www.pololu.com/
Responsible person according to GPSR
Eckstein GmbH, Am Ostbahnhof 3, 38678 Clausthal-Zellerfeld, Niedersachsen, Deutschland, [email protected], https://eckstein-shop.de

Cookiename	Beispielinhalt	Ablaufzeit
_ga_*	deleted	730 Tage
_ga	GA1.1.8643343795.1726666186	730 Tage

Pololu High-Power Simple Motor Controller G2 24v19

Dimensions and Weight

User's Guide

Software and Drivers for Windows

Dimension

Pololu High-Power Simple Motor Controller G2 24v19

Service package

Services for business customers