Pololu Big Pushbutton Power Switch with Reverse Voltage Protection, HP

Artikelnummer: PO2813

EAN: 4060137017933

Hersteller-Artikelnr.: 2813

The Pololu Pushbutton Power Switches are sophisticated power control alternatives to bulky mechanical switches. The main function is pushbutton-based latching power control, where one push turns on power and another push turns it off. Additional control inputs allow advanced applications such as automatic shutdown by the device being powered. This HP version operates from 4.5 V to 40 V and can deliver continuous currents up to around 16 A.

Kategorie: Power Switches


6,94 €

inkl. 19% USt.,

sofort verfügbar

Lieferzeit: 1 bis 2 Tage

Stück


Beschreibung

Overview

The Pololu Pushbutton Power Switch is a compact, solid-state power switch that features built-in reverse-voltage protection and is controlled by a momentary pushbutton: one push turns on power and another push turns it off. This is a patented design initially created for use in our own products as an alternative to bulky mechanical switches. Because the switched current does not flow through the mechanical switch, a large variety of small, low-power switches can be used to control a substantial amount of power. The use of momentary switches also allows multiple switches to be used in parallel to control the power to one load.

The board has a small pushbutton already installed and offers convenient points for connecting external pushbutton or tactile switches in parallel. It also offers several alternate pushbutton connection options that result in push-on-only or push-off-only operation, and additional inputs enable further power control options like allowing the load to turn off its own power, which can be beneficial when used with battery chemistries sensitive to over-discharging.

Warning: Do not use this switch as an emergency cutoff or similar safety disconnect in applications where failure to cut power could lead to injury or property damage.

The switch and control inputs control the state of a latching circuit that in turn controls a pair of power MOSFETs through which the main current flows. Four versions of the Pololu Pushbutton Power Switches are available:

The two Mini Pushbutton Power Switches are smaller, lower-current versions that are useful for applications with tight size constraints or lower power requirements. Also, the the Mini LV is the only one of the four that works below 4.5 V; since it can operate down to 2.2 V, this version can be used with a single lithium cell battery.

The pinout of the Big version is the same as the pinout of the Mini version with several additional redundant connection points for convenience, including main power connections that are compatible with 5 mm terminal blocks.

Spezifikation

The Pololu Pushbutton Power Switch works well in its intended application as a DC power switch for small robots, but because it is fundamentally different from a mechanical power switch, the benefits and drawbacks of the components must be fully considered.

Benefits over mechanical switches:

  • Compact size
  • Reverse-voltage protection
  • Allows multiple (parallel) switches for improved user interface
  • Better turn-on characteristics than a bouncing mechanical switch
  • Limited LC spikes for low-resistance loads
  • Allows self-shutoff (OFF input)
  • Allows external digital device to control the power state (ON and CTRL inputs)
  • Breadboard and perfboard compatible (0.1?-pitch)

Drawbacks compared to mechanical switches:

  • Switch is one-directional (power applied to VOUT cannot be switched to VIN)
  • Limited operating voltage range
  • Switch can lose its state when power is disconnected (the switch typically defaults to being off when power is first applied, but it can default to being on near the upper end of the operating range)
  • Switches DC only (does not maintain state through power disruptions or excessive noise)
  • No complete isolation in off state

Document

Bewertungen (0)

Durchschnittliche Artikelbewertung

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufenscheidung:

Frage zum Produkt

Kontaktdaten
Frage zum Produkt
max. 500 Zeichen

ähnliche Produkte:
FPF1320 Power Multiplexer Carrier with USB Micro-B Connector FPF1320 Power Multiplexer Carrier with USB Micro-B Connector
sofort verfügbar
Pololu Mini MOSFET Slide Switch with Reverse Voltage... Pololu Mini MOSFET Slide Switch with Reverse Voltage...
sofort verfügbar
Pololu Mini MOSFET Slide Switch with Reverse Voltage... Pololu Mini MOSFET Slide Switch with Reverse Voltage...
sofort verfügbar
Pololu Mini Pushbutton Power Switch with Reverse Voltage... Pololu Mini Pushbutton Power Switch with Reverse Voltage...
sofort verfügbar
Pololu Mini Pushbutton Power Switch with Reverse Voltage... Pololu Mini Pushbutton Power Switch with Reverse Voltage...
sofort verfügbar
Pololu Mini Pushbutton Switch: PCB-Mount, 2-Pin, SPST,... Pololu Mini Pushbutton Switch: PCB-Mount, 2-Pin, SPST,...
sofort verfügbar
Pololu Rocker Switch: 3-Pin, SPDT, 10A Pololu Rocker Switch: 3-Pin, SPDT, 10A
sofort verfügbar
Pololu Toggle Switch: 3-Pin, SPDT, 5A Pololu Toggle Switch: 3-Pin, SPDT, 5A
sofort verfügbar
Pololu TPS2113A Power Multiplexer Carrier with USB... Pololu TPS2113A Power Multiplexer Carrier with USB...
sofort verfügbar
Kunden kauften dazu folgende Produkte
Pololu Mini Pushbutton Power Switch with Reverse Voltage... Pololu Mini Pushbutton Power Switch with Reverse Voltage...
sofort verfügbar
Pololu Big MOSFET Slide Switch with Reverse Voltage... Pololu Big MOSFET Slide Switch with Reverse Voltage...
sofort verfügbar
Jumper Wire 10x1P female to male 20cm Jumper Wire 10x1P female to male 20cm
sofort verfügbar
Prototype Shield V5 + Mini Breadboard für Arduino Uno R3 Prototype Shield V5 + Mini Breadboard für Arduino Uno R3
sofort verfügbar
Jumper Wire 10x1P male to male 20cm
sofort verfügbar
Pro Mini Modul 5V 16MHz Arduino kompatibel Pro Mini Modul 5V 16MHz Arduino kompatibel
Lange Lieferzeit beachten!