Product Information
Pilot Rd. 920
Nevada
Las Vegas, Vereinigte Staaten, 89119
[email protected]
https://www.pololu.com/
Am Ostbahnhof 3
Niedersachsen
Clausthal-Zellerfeld, Deutschland, 38678
[email protected]
https://eckstein-shop.de
GTIN: | 4060137034701 |
HAN: | 3093 |
Category: | Button/Miscellaneous |
Storage Tiers: | Maintain |
Shipping weight: | 0,08 kg |
Item weight: | 0,07 kg |
Dimensions ( Length × Width × Height ): | 16,00 × 16,00 × 0,60 cm |
Product Description
This flexible LED panel contains 256 RGB LEDs arranged in a 16x16 grid. The LEDs can be individually addressed using an easy-to-control SPI interface, allowing you full control over the color of each RGB LED. The panel runs on 5 V and can be chained with additional SK9822 LEDs.
These SK9822-based LED panels work as a drop-in replacement for our older APA102C-based panels in many applications. However, due to color differences, we do not recommend using the SK9822 and APA102C together in the same project. Also, due to a slight difference in the protocol, you might have to update your code to handle the SK9822. See below for a more detailed comparison of the SK9822 and APA102C.These flexible RGB LED panels based on the SK9822 LED/driver IC are an easy way to add complex lighting effects to a project. Each SK9822 LED has an integrated driver that allows you to control the color and brightness of each LED. The SK9822 has constant current control, so voltage drops caused by the resistance in long power connections have little effect on the SK9822’s color and brightness as long as the voltage stays above 3.5 V. The panels can be chained together and can be chained to other SK9822-based products such as our SK9822-Based LED Strips.
Warning: These LED panels can draw a lot of current and overheat if they are operated at full brightness, so we recommend limiting the brightness. While these LED panels are flexible, they should not be bent too sharply, and they are not recommended for use in applications where they will be subjected to repeated flexing.
Features and specifications
- Individually addressable RGB LEDs
- 24-bit color control
- Additional 5-bit brightness control; 32 brightness steps per pixel
- SPI control interface
- 5 V operating voltage
- Color and brightness are mostly voltage-independent down to 3.5 V
- Each RGB LED draws approximately 50 mA with red, green, and blue at full brightness
- 1.0 cm spacing between LED centers
- Black panel color
- Power/data connectors for easy chaining, and additional power and ground wires for alternate power connections
- Example code available for Arduino
Dimensions
- Size: 16 cm x 16 cm
- Weight: 65 g
General specifications
- Typical operating voltage: 5 V
- LEDs: 256
- RGB LED density: 1 per square centimeter
- Color: RGB
Shipping Content
1 x Addressable RGB 16x16-LED Flexible Panel, 5V, 10mm Grid (SK9822)
Write the first review for this item and help others make a purchase decision!
Manufacturer according to GPSR
Pololu Corporation, Pilot Rd. 920, 89119 Las Vegas, Nevada, Vereinigte Staaten, [email protected], https://www.pololu.com/
Responsible person according to GPSR
Eckstein GmbH, Am Ostbahnhof 3, 38678 Clausthal-Zellerfeld, Niedersachsen, Deutschland, [email protected], https://eckstein-shop.de