Pololu 7.5V, 5A Step-Down Voltage Regulator D36V50F7

Pololu

Pololu 7.5V, 5A Step-Down Voltage Regulator D36V50F7

Name: Pololu 7.5V, 5A Step-Down Voltage Regulator D36V50F7
Brand: Pololu
SKU: PO4093
Price: 29.69 EUR
Availability: InStock

SKU: PO4093

29,69 €

per pcs

incl. 19% VAT plus

Net: 24,95 €

Choose tax zone / country of delivery

Product customisation & sourcing & PCBA one-stop service are available with us.

Request personal offer!

Available immediately

Delivery time: ca. 3 weeks (DE - int. shipments may differ)

Product Information

Product safety information

Manufacturer information:

Pololu Corporation
Pilot Rd. 920
Nevada
Las Vegas, Vereinigte Staaten, 89119
[email protected]
https://www.pololu.com/

Responsible person:

Eckstein GmbH
Am Ostbahnhof 3
Niedersachsen
Clausthal-Zellerfeld, Deutschland, 38678
[email protected]
https://eckstein-shop.de

Dimensions and Weight
GTIN:	4060137109034
HAN:	4093
Category:	Step-Down
Regulator-Function:	Step-Down
Output-Type:	fixed
Output Voltage:	7.5V
Operating Voltage max.:	50V
Operating Voltage min.:	8.3V
Continuous Output Current:	5A
Quiescent Current max.:	4mA
Storage Tiers:	Maintain
Shipping weight:	0,01 kg
Item weight:	0,01 kg
Dimensions ( Length × Width × Height ):	2,60 × 2,60 × 1,00 cm

Product Description

Overview

The D36V50Fx family of buck (step-down) voltage regulators generates lower output voltages from input voltages as high as 50 V. They are switching regulators (also called switched-mode power supplies (SMPS) or DC-to-DC converters), which makes them much more efficient than linear voltage regulators, especially when the difference between the input and output voltage is large. These regulators can typically support continuous output currents between 2 A and 9 A, depending on the input voltage and output voltage (see the Maximum continuous output current section below). In general, the available output current is a little higher for the lower-voltage versions than it is for the higher-voltage versions, and it decreases as the input voltage increases.

This family includes six versions with fixed output voltages ranging from 3.3 V to 12 V:

D36V50F3: Fixed 3.3V output
D36V50F5: Fixed 5V output
D36V50F6: Fixed 6V output
D36V50F7: Fixed 7.5V output
D36V50F9: Fixed 9V output
D36V50F12: Fixed 12V output

The regulators have input reverse voltage protection up to 40 V, output undervoltage and overvoltage protection, over-current protection, and short-circuit protection. A thermal shutdown feature also helps prevent damage from overheating and a soft-start feature limits the inrush current and gradually ramps the output voltage on startup.

If you do not need quite as much current, consider the very similar D36V28Fx family of step-down voltage regulators, which can deliver up to 4 A in a wide range of output voltages.

Features

Input voltage: 8.3 V to 50 V (minimum input subject to dropout voltage considerations; see the dropout voltage section for details)
Output voltage: 7.5 V with 4% accuracy
Typical maximum continuous output current: 3 A to 7 A (see the maximum continuous output current graph below)
Typical efficiency of 80% to 95%, depending on input voltage, output voltage, and load (see the efficiency graph below)
Switching frequency: ~500 kHz under heavy loads
Power-save mode with ultrasonic operation that increases light load efficiency by reducing switching frequency, but keeps it above the audible range (20 kHz)
2 mA to 4 mA typical no-load quiescent current (see the quiescent current graph below)
Enable input with precise cutoff threshold for disconnecting the load and putting the regulator into a low-power state that draws approximately 10 µA to 20 µA per volt on VIN
“Power good” output indicates when the regulator cannot adequately maintain the output voltage
Output undervoltage and overvoltage protection
Soft-start feature limits inrush current and gradually ramps output voltage
Integrated reverse-voltage protection up to 40 V, over-current and short-circuit protection, over-temperature shutoff
Compact size: 1? × 1? × 0.375? (25.4 mm × 25.4 mm × 9.5 mm)
Three 0.086? mounting holes for #2 or M2 screws

Dimensions

Size: 1? × 1? × 0.375?¹
Weight: 7.0 g¹

General specifications

Minimum operating voltage: 8.3 V²
Maximum operating voltage: 50 V
Continuous output current: 5 A³
Output voltage: 7.5 V
Reverse voltage protection?: Y⁴
Maximum quiescent current: 4 mA⁵
Output type: fixed 7.5V

Identifying markings

PCB dev codes: reg24d
Other PCB markings: 0J12574, blank white box

Notes:

1. Without included optional headers.
2. Subject to dropout voltage considerations. See the dropout voltage graph under the description tab for more information.
3. Typical continuous output current at 36 V in. Actual achievable continuous output current is a function of input voltage and is limited by thermal dissipation. See the output current graph under the description tab for more information.
4. To -40 V. Connecting supplies over 40 V in reverse can damage the device.
5. While enabled with no load. Can be reduced to under 1 mA using the enable pin.

Write the first review for this item and help others make a purchase decision!

Dimension diagram

Manufacturer according to GPSR
Pololu Corporation, Pilot Rd. 920, 89119 Las Vegas, Nevada, Vereinigte Staaten, [email protected], https://www.pololu.com/
Responsible person according to GPSR
Eckstein GmbH, Am Ostbahnhof 3, 38678 Clausthal-Zellerfeld, Niedersachsen, Deutschland, [email protected], https://eckstein-shop.de

Cookiename	Beispielinhalt	Ablaufzeit
_ga_*	deleted	730 Tage
_ga	GA1.1.8643343795.1726666186	730 Tage

Pololu 7.5V, 5A Step-Down Voltage Regulator D36V50F7

Dimensions and Weight

Features

Dimension diagram

Pololu 7.5V, 5A Step-Down Voltage Regulator D36V50F7

Service package

Services for business customers