Pololu

Pololu 73:1 Metal Gearmotor 20Dx42L mm (Short Output Shaft)

SKU: PO1163

GTIN:>4060137038327

HAN: 1163

Category: Micro Gearmotor

42,78 €

per pcs

incl. 19% VAT plus

Net: 35,95 €

Choose tax zone / country of delivery

From

Unit price / pcs

42,78 € (Net: 35,95 €)

40,21 € (Net: 33,79 €)

Product customisation & sourcing & PCBA one-stop service are available with us.

Request personal offer!

Available immediately

Delivery time: 10 - 12 Workdays (DE - int. shipments may differ)

These small brushed DC gearmotors can deliver a lot of power for their size. This version has a 6V brushed DC motor combined with a 73:1 metal spur gearbox. The gearmotor is cylindrical with a diameter of 20 mm, and the D-shaped output shaft is 4 mm in diameter and extends 10.7 mm from the face plate of the gearbox.

Key specs at 6 V: 180 RPM and 250 mA free-run, 60 oz-in (4.3 kg-cm) and 3.2 A stall.

Note: This gearmotor is being replaced by a new version with a slightly different gear ratio and a longer output shaft (the motor portion is unchanged). This short-shaft version will be discontinued when the remaining stock is gone.

More product details

Description
Reviews

Product Information

Product safety information

Manufacturer information:

Pololu Corporation
Pilot Rd. 920
Nevada
Las Vegas, Vereinigte Staaten, 89119
[email protected]
https://www.pololu.com/

Responsible person:

Eckstein GmbH
Am Ostbahnhof 3
Niedersachsen
Clausthal-Zellerfeld, Deutschland, 38678
[email protected]
https://eckstein-shop.de

Dimensions and Weight
GTIN:	4060137038327
HAN:	1163
Category:	Micro Gearmotor
product_status:	retired
Shipping weight:	0,05 kg
Item weight:	0,04 kg
Dimensions ( Length × Width × Height ):	4,40 × 2,00 × 2,00 cm

Product Description

These small brushed DC gearmotors can deliver a lot of power for their size. This version has a 6V brushed DC motor combined with a 73:1 metal spur gearbox. The gearmotor is cylindrical with a diameter of 20 mm, and the D-shaped output shaft is 4 mm in diameter and extends 10.7 mm from the face plate of the gearbox.

Key specs at 6 V: 180 RPM and 250 mA free-run, 60 oz-in (4.3 kg-cm) and 3.2 A stall.

Note: This gearmotor is being replaced by a new version PO3453 with a slightly different gear ratio and a longer output shaft (the motor portion is unchanged). This short-shaft version will be discontinued when the remaining stock is gone.

New versions available! We have replaced these older short-shaft versions of our 20D mm gearmotors with a much wider assortment of gear ratios that feature longer output shafts. You can find the full selection of these new versions here. The older versions are now only available by large-volume special order. Please contact us for more information.

Note that the following product page is being left here for historical purposes; it has not been updated to reflect our current offering of 20D mm gearmotors.

Overview

The 20D mm line of brushed DC gearmotors all have the same dimensions except for the length of the gearbox, and they are intended for use at 6 V. In general, these kinds of motors can run at voltages above and below this nominal voltage, so they should comfortably operate in the 3 – 9 V range. Higher voltages could start negatively affecting the life of the motor, and lower voltages might not be practical. Four different gear ratios are available:

Dimensions

Size:20D x 44L mm
Weight:43 g
Shaft diameter:4 mm

General specifications

Gear ratio:73:1
No-load speed @ 6V:180 rpm
No-load current @ 6V:250 mA
Stall current @ 6V:3200 mA
Stall torque @ 6V:60 oz·in

Write the first review for this item and help others make a purchase decision!

Manufacturer according to GPSR
Pololu Corporation, Pilot Rd. 920, 89119 Las Vegas, Nevada, Vereinigte Staaten, [email protected], https://www.pololu.com/
Responsible person according to GPSR
Eckstein GmbH, Am Ostbahnhof 3, 38678 Clausthal-Zellerfeld, Niedersachsen, Deutschland, [email protected], https://eckstein-shop.de

Cookiename	Beispielinhalt	Ablaufzeit
_ga_*	deleted	730 Tage
_ga	GA1.1.8643343795.1726666186	730 Tage

Pololu 73:1 Metal Gearmotor 20Dx42L mm (Short Output Shaft)

Dimensions and Weight

Pololu 73:1 Metal Gearmotor 20Dx42L mm (Short Output Shaft)

Service package

Services for business customers