Pololu 227:1 Metal Gearmotor 25Dx56L mm MP 12V brushed DC motor

Pololu 227:1 Metal Gearmotor 25Dx56L mm MP 12V brushed DC motor

Extended services for motors:
Customized solutions
Alternative solutions
Bulk purchase request

31,95 € (Net 26,85 €)

incl. 19% VAT , plus (L)

Choose tax zone / country of delivery

pack

Product customisation & sourcing & PCBA one-stop service are available with us.

Request personal offer!

Orderable, information on delivery time as follows, otherwise please enquire.
Delivery time: 6 - 8 Workdays (Other countries)

SKU: PO3233
GTIN: 4060137102035
Category: I-Form
Manufacturers: Pololu
MPN: 3233
Storage Tiers: Maintain

This gearmotor consists of a medium-power, 12 V brushed DC motor combined with a 226.76:1 metal spur gearbox. The gearmotor is cylindrical, with a diameter just under 25 mm, and the D-shaped output shaft is 4 mm in diameter and extends 12.5 mm from the face plate of the gearbox. This gearmotor is also available with an integrated encoder.

Exact gear ratio: 22×22×22×22×22×22×24 / 12×10×10×10×10×10×10 ? 226.76:1

Key specifications

voltage: 12 V
no-load performance: 35 RPM, 80 mA
stall extrapolation: 24 kg?cm (330 oz?in), 1.8 A

Dimensions

Size:25D x 56L mm(Length measurement is from gearbox face plate to back of motor (it does not include the output shaft or motor terminals).)
Weight:94g
Shaft diameter:4 mm(D shaft)

General specifications

Gear ratio: 226.76:1
No-load speed @ 12V: 35 rpm(Typical; ±20%)
No-load current @ 12V: 0.080 A(Typical, ±50%; no-load current depends on internal friction, which is affected by many factors, including ambient temperature and duration of motor operation.)
Stall current @ 12V: 1.8 A
Stall torque @ 12V: 24 kg·cm(Stalling is likely to damage the gearmotor. Stall parameters come from a theoretical extrapolation of performance at loads far from stall. As the motor heats up, as happens as it approaches an actual stall, the stall torque and current decrease.)
No-load speed @ 6V: 18 rpm
Stall current @ 6V: 0.90 A
Stall torque @ 6V: 12 kg·cm(This motor will run at 6 V but is intended for operation at 12 V.)
Motor type: 12V, 1.8A stall (MP 12V)

Performance at maximum efficiency

Max efficiency @ 12V: 32 %
Speed at max efficiency: 30 rpm
Torque at max efficiency: 3.6 kg·cm
Current at max efficiency: 0.28 A
Output power at max efficiency: 1.1 W

General specifications

Encoders?: N

Storage Tiers:	Maintain
Dimension (mm):	25D
Form/Type:	Medium-Power (MP)
Encoder:	Without
Stall Current (A):	1.8
Stall Torque (kg-cm):	24
Rated Voltage (V):	12
Gear Ratio:	227:1
Shaft:	Single
No-Load Speed (RPM):	35
No-Load Current (A):	0.08
Shipping weight:	0,11 kg
Item weight:	0,09 kg
Dimensions ( Length × Width × Height ):	5,60 × 2,50 × 2,50 cm