Pololu 12V Step-Up Voltage Regulator Spannungsregler U3V16F12

Pololu 12V Step-Up Voltage Regulator Spannungsregler U3V16F12

5,95 € (Net 5,00 € )

In stock

incl. 19% VAT , plus (S)

Choose tax zone / country of delivery

pcs

Product customisation & sourcing & PCBA one-stop service are available with us.

Request personal offer!

Available immediately
Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

SKU: PO4945
GTIN: 4060137081781
Category: Step-Up
Manufacturers: Pololu
MPN: 4945
Storage Tiers: Tier3

The U3V16Fx family of boost (step-up) voltage regulators generate higher output voltages from input voltages as low as 1.3 V. (Note: The minimum start-up voltage is 2.7 V.) They are switching regulators (also called switched-mode power supplies (SMPS) or DC-to-DC converters) and have a typical efficiency between 85% to 95%.

The regulators actively limit the instantaneous input currents to 2 A when boosting, and input currents up to around 1.6 A can typically be maintained for many minutes without triggering thermal shutdown, though the actual performance depends on the input and output voltages as well as external factors such as ambient temperature and airflow. For boost regulators, the output current equals the input current times the efficiency divided by the boost ratio of VOUT to VIN, so the more you are boosting, the lower the maximum output current will be.

These regulators feature a variety of built-in protections, including cycle-by-cycle input current limiting, under-voltage lockout, and over-temperature shutdown.

Warning: This boost regulator uses the typical topology that connects the input to the output through an inductor and diode, with nothing to completely break that current path. Therefore, the input voltage will go through to the output even when the regulator is disabled, and exposure to short circuits or other excessive loads will damage the regulator. This regulator also does not have protection against reverse voltage.

Features and specifications

Output voltage: 12 V with 4% accuracy
Input voltage: 1.3 V to 16 V (Note: minimum start-up voltage is 2.7 V)
Typical efficiency of 85% to 95%, depending on input voltage, output voltage, and load
Switching frequency: ~1.2 MHz under heavy loads
Power-save mode that increases light load efficiency by reducing switching frequency
Typical no-load quiescent currents under 1 mA
2 A switch current limit
Typical continuous input currents up to around 1.6 A
Tolerates input voltage above output set voltage
Integrated protections:
- Over-temperature shutdown
- Soft-start feature limits inrush current and gradually ramps output voltage
- Under-voltage lockout
Compact size: 13.1 × 8.1 × 3 mm, Without included optional headers.
Weight: 0.4 g

General specifications

Minimum operating voltage: 1.3 V. Note: the minimum startup voltage is 2.7 V, but the regulator can operate down to 1.3 V after startup.
Maximum operating voltage: 16 V. The input voltage is passed through to the output of the regulator if VIN exceeds VOUT.
Maximum input current: 2 A. Instantaneous. This is the rating for the switch, and regulator actively limits input current to this when boosting. Sustainable input current depends on input and output voltage and external conditions like ambient temperature and airflow.
Output voltage: 12 V
Reverse voltage protection?: N