Pololu 1000:1 Micro Metal Gearmotor HP 6V High-Power Brushed DC Motor

Pololu 1000:1 Micro Metal Gearmotor HP 6V High-Power Brushed DC Motor

34,95 € (Net 29,37 €)

incl. 19% VAT , plus (M)

Choose tax zone / country of delivery

pcs

Product customisation & sourcing & PCBA one-stop service are available with us.

Request personal offer!

Orderable, information on delivery time as follows, otherwise please enquire.
Delivery time: 6 - 8 Workdays (Other countries)

SKU: PO1595
GTIN: 4060137107467
Category: Micro Gearmotor
Manufacturers: Pololu
MPN: 1595
Storage Tiers: Maintain

This gearmotor is a miniature high-power, 6 V brushed DC motor with a 986.41:1 metal gearbox, making it a great choice for applications requiring fine control at very low speeds. It has a cross section of 10 x 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. (Note: stall torque and current specifications are theoretical values; stalling the motor will damage the gearbox.)

These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-power 6 V and 12 V motors with long-life carbon brushes (HPCB), and high-power (HP), medium power (MP), and low power (LP) 6 V motors with shorter-life precious metal brushes. The 6 V and 12 V HPCB motors offer the same performance at their respective nominal voltages, just with the 12 V motor drawing half the current of the 6 V motor. The 6 V HPCB and 6 V HP motors are identical except for their brushes, which only affect the lifetime of the motor.

Exact gear ratio: 25×34×35×34×34×34×27 / 12×9×12×14×14×14×9 ≈ 986.41:1

General specifications

Gear ratio: 986.41:1
No-load speed @ 6V: 31 rpm, Typical ±20%
No-load current @ 6V: 0.1 A, Typical, ±50%; no-load current depends on internal friction, which is affected by many factors, including ambient temperature and duration of motor operation.
Stall current @ 6V: 1.6 A. This is a theoretical value; stalling the gearbox output shaft will damage the gearbox.
Stall torque @ 6V: 12 kg·cm
Extended motor shaft?: N
Motor type: 1.6A stall @ 6V (HP 6V)
Size: 10 x 12 x 29.5 mm, Output shaft adds 9 mm to the 29.5 mm length.
Weight: 10.5 g
Shaft diameter: 3 mm D shaft.

Performance at maximum efficiency

Max efficiency @ 6V: 28 %
Speed at max efficiency: 26 rpm
Torque at max efficiency: 2.0 kg·cm
Current at max efficiency: 0.32 A
Output power at max efficiency: 0.53 W

Storage Tiers:	Maintain
Dimension (mm):	10x12 Micro
Form/Type:	High-Power (HP)
Encoder:	Without
Stall Current (A):	1.6
Stall Torque (kg-cm):	12
Rated Voltage (V):	6
Gear Ratio:	1000:1
Shaft:	Single
No-Load Speed (RPM):	31
No-Load Current (A):	0,1
Shipping weight:	0,01 kg
Item weight:	0,01 kg
Dimensions ( Length × Width × Height ):	2,95 × 1,20 × 1,00 cm