This is the motor and encoder portion of our 24V37D mmmetal gearmotorswith 64 CPR encoders. It does not include a gearbox, but the pinion gear on the output shaft works with all of our helical pinion 37D mm gearmotor gearboxes, so this can be used as a replacement motor or encoder for those gearboxes.
Key specifications:
voltage: 24 V
no-load performance: 10,000 RPM, 100 mA
stall extrapolation: 0.55 kg?cm (8 oz?in), 3 A
Dimensions
Size: 34.5D × 46.5L mm (Length measurement does not include motor shaft or pinion gear.)
Weight: 110 g
General specifications
Gear ratio: 1:1 (This motor does not have a gearbox.)
No-load speed @ 24V: 10000 rpm
No-load current @ 24V:0.1 A
Stall current @ 24V:3 A
Stall torque @ 24V:0.55 kg·cm (Stalling can damage the motor. Stall parameters come from a theoretical extrapolation of performance at loads far from stall. As the motor heats up, as happens as it approaches an actual stall, the stall torque and current decrease.)
No-load speed @ 12V: 5000 rpm
No-load current @ 12V:0.08 A
Stall current @ 12V: 1.7 A
Stall torque @ 12V:0.3 kg·cm (This motor will run at 12 V but is intended for operation at 24 V.)
Motor type:24V
Lead length: 20 cm (May vary by a few centimeters.)
Write the first review for this item and help others make a purchase decision!
Manufacturer according to GPSR Pololu Corporation, Pilot Rd. 920, 89119 Las Vegas, Nevada, Vereinigte Staaten, [email protected], https://www.pololu.com/
By selecting "Accept all", you give us permission to use the following services on our website: Strictly necessary cookies, YouTube, Vimeo, Google Map, PayPal Express Checkout und Ratenzahlung, Google Kundenrezensionen, GoAffPro Affiliate Tracking, Google Analytics 4, Google Ads Conversion Tracking. You can change the settings at any time (fingerprint icon in the bottom left corner). For further details, please see Individual configuration and our Privacy notice.
The settings you specify here are stored in the "local storage" of your device. The settings will be remembered for the next time you visit our online shop. You can change these settings at any time (fingerprint icon in the bottom left corner).
For more information on cookie lifetime and required essential cookies, please see the Privacy notice.
Would you like to see these contents? Activate the desired contents for one session only or allow the website to remember these settings. Once you have given your consent, the third-party data can be loaded. For this, third-party cookies might be stored on your device. You can change these settings at any time (fingerprint icon in the bottom left corner). For further details, please see the Privacy notice.