Pololu TB67S279FTG Stepper Motor Driver Carrier 10V-47V

Name: Pololu TB67S279FTG Stepper Motor Driver Carrier 10V-47V
Brand: Pimoroni
SKU: PO2974
Price: 15.17 EUR
Availability: InStock

Item No.: PO2974

HAN: 2974

EAN: 4060137049057

HS Code: 8542311100

Herkunftsland: US

Lagerstufe: Maintain

15,17 €

per pack

incl. 19% VAT plus (S)

Net: 12,75 €

Choose tax zone / country of delivery

Product Description

This breakout board makes it easy to use Toshiba’s TB67S279FTG microstepping bipolar stepper motor driver, which features adjustable current limiting and seven microstep resolutions (down to 1/32-step). In addition, it dynamically selects an optimal decay mode by monitoring the actual motor current, and it can automatically reduce the driving current below the full amount when the motor is lightly loaded to minimize power and heat. The TB67S279FTG has a wide operating voltage range of 10 V to 47 V and can deliver approximately 1.2 A per phase continuously without a heat sink or forced air flow (up to 2 A peak). It features built-in protection against under-voltage, over-current, and over-temperature conditions; our carrier board also adds reverse-voltage protection (up to 40 V).

Here are some of the board’s key features:

Simple step and direction control interface
Seven different step modes: full-step, non-circular half-step, circular half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates
Advanced Dynamic Mixed Decay (ADMD) dynamically switches between slow and fast decay modes by monitoring the state of current decay (not according to fixed timing)
Configurable Active Gain Control (AGC) automatically reduces drive current to minimize power consumption and heat generation when maximum torque is not needed
Motor supply voltage: 10 V to 47 V
Maximum continuous current per phase without additional cooling:
- TB67S249FTG: 1.7 A (4.5 A peak)
- TB67S279FTG: 1.2 A (2 A peak)
Built-in regulator (no external logic voltage supply needed)
Can interface directly with 3.3 V and 5 V systems
Under-voltage lockout and protection against over-current/short-circuit and over-temperature
Open-load detection
Active-low error outputs indicate over-current, over-temperature, or open-load condition
Carrier board adds reverse-voltage protection up to 40 V
Compact size (1.0? x 1.4?)
Exposed solderable ground pad below the driver IC on the bottom of the PCB

This version uses a TB67S279FTG driver and can deliver approximately 1.2 Aper phase continuously without a heat sink or forced air flow (up to 2 A peak). It can be distinguished by the marking “S279FTG” on the driver IC.

Dimensions

Size:1.0 x 1.4'
Weight:4.3 g. Without included hardware.

General specifications

Motor driver:TB67S279FTG
Minimum operating voltage:10 V
Maximum operating voltage:47 V
Continuous current per phase:1.2 A
Maximum current per phase:2 A
Minimum logic voltage:2 V. This is the input logic high threshold.
Maximum logic voltage:5.5 V
Microstep resolutions:full, non-circular 1/2, 1/2, 1/4, 1/8, 1/16, 1/32
Current limit control:potentiometer
Reverse voltage protection?:Y. Note: Reverse voltage protection only works up to 40 V.
Header pins soldered?:N