The compact (18 mm × 13 mm) D24V10F6 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 6 V while allowing for a maximum output current of 1 A. This regulator offers typical efficiencies between 85% and 93% and has a very low dropout, so it can be used with input voltages as low as a few hundred millivolts above 6 V. The pins have a 0.1″ spacing, making this board compatible with standard solderless breadboards and perfboards.
Features
- Fixed 3.3 V, 5 V, 6 V, 9 V, or 12 V output (depending on regulator version) with 4% accuracy
- Typical efficiency of 80% to 93%
- 500 kHz switching frequency (when not in power-save mode)
- 2 ms soft-start reduces in-rush current on power-up
- 200 μA typical no-load quiescent current
- Over-current and short-circuit protection, over-temperature shutoff
- Small size: 18 mm × 13 mm × 3.5 mm
- Weight: 1.0 g (Without included optional headers.)
General specifications
- Minimum operating voltage: 6.1 V?For small loads?
- Maximum operating voltage: 36 V
- Maximum output current: 1 A
- Output voltage: 6 V
- Reverse voltage protection?: N
- Maximum quiescent current: 0.2 mA(While enabled (SHDN = HIGH) with no load)
Identifying markings
- PCB dev codes: reg17a
- Other PCB markings: 0J8557, blank white box
| Item information | Value |
|---|---|
| GTIN: | 4060137015991 |
| HAN: | 2832 |
| Category: | Step-Down |
| Regulator-Function: | Step-Down |
| Output-Type: | fixed |
| Output Voltage: | 6V |
| Operating Voltage Max. (V): | 36V |
| Operating Voltage Min. (V): | 6.1V |
| Quiescent Current max. (mA): | 0.2mA |
| Output Current max. (mA): | 1000mA |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Dimensions ( Length × Width × Height ): | 1,30 × 1,80 × 0,40 cm |
Pololu Corporation, Pilot Rd. 920, 89119 Las Vegas, Nevada, Vereinigte Staaten, [email protected], https://www.pololu.com/