Product Description
Power Over Ethernet HAT (G) for Raspberry Pi 5 / CM 5 without Acce is an expansion board for powering a Raspberry Pi through its Ethernet cabling. Used with a router or switch supporting IEEE 802.3af/at, it provides network connectivity and power through a single Ethernet cable. It is intended for Raspberry Pi installations supplied from the network infrastructure rather than a separate local power connection.
The board connects through the standard Raspberry Pi 40-pin GPIO header. A non-isolated switched-mode converter produces the 5 V supply. The HAT fits the official Raspberry Pi 5 case and supports installation with the official Active Cooler.
Highlights
- Standard Raspberry Pi 40-pin GPIO connection
- PoE and PoE+ support compliant with IEEE 802.3af/at
- Integrated IC solution for the PoE power supply
- Non-isolated switched-mode power conversion
- Compact construction for installation in the official Raspberry Pi 5 case
Technical Features
- Supported platforms: Raspberry Pi 5 and CM 5
- PoE standards: IEEE 802.3af and IEEE 802.3at
- Input voltage: 38–57 V DC
- Output through GPIO header: 5 V DC, 5 A maximum
- Converter topology: non-isolated switched-mode power supply
- Connection: Raspberry Pi 40-pin GPIO header
- Board dimensions: 56.5 × 64.98 mm
- Mechanical compatibility: official Raspberry Pi 5 case and official Active Cooler
- Acce: no
Application Areas
- Powering a Raspberry Pi 5 through the same Ethernet cable used for its network connection.
- Supplying a supported CM 5 installation from an IEEE 802.3af/at router or switch.
- Integrating PoE power into Raspberry Pi 5 assemblies using the official case or official Active Cooler.
Notes
- Operation requires a PoE router or switch supporting IEEE 802.3af/at.
- The 5 A output rating is the maximum current available at the 5 V GPIO output.
- The Raspberry Pi, PoE switch, official case and Active Cooler are not included.
What's Included
- 1 × PoE HAT (G) expansion board
- 1 × 2×2-pin header
- 1 × 2×20-pin header
- 1 × standoff pack
| Item information | Value |
|---|---|
| GTIN: | 4060137306365 |
| HAN: | 27670 |
| Category: | HATs |
| Controller-IC: | PoE PD IC |
| Interface Type: | Raspberry Pi 40-pin GPIO |
| Abmessungen (mm): | 56.5 x 64.98 mm |
| Isolation Voltage: | 0 |
| Classification Supported: | Ja |
| Detection/Classification Supported: | Ja |
| Maintain Power Signature (MPS) Supported: | Ja |
| Signature Detection Supported: | Ja |
| DC/DC Efficiency: | 90 |
| Max PoE Power: | 25000 |
| PD Input Voltage Range: | 38–57 V |
| Output Voltage Range: | 5V |
| PoE Input Pairs Mode: | Mode A / Mode B |
| Shipping weight: | 0,02 kg |
| Item weight: | 0,02 kg |
| Dimensions ( Length × Width ): | 6,50 × 6,50 cm |
Waveshare International Limited, World Trade Plaza south side, Fuhong Rd, Futian District, 518000 Shenzhen, China, [email protected], https://waveshare.com/