Product Description
Variant: PCIe TO M.2 USB HAT+.
The PCIe to USB 3.2 Gen1 And M.2 HAT for Raspberry Pi 5 combines an M.2 slot for NVMe SSDs with four USB 3.2 Gen1 ports. It is intended for Raspberry Pi 5 builds requiring SSD storage alongside additional USB peripherals. The board connects to the host's 16-pin PCIe interface using the supplied cable and mounts above the Raspberry Pi. Operation is driver-free and plug-and-play. A compatible NVMe SSD and Raspberry Pi 5 are required separately; booting the host from the SSD is supported.
Highlights
- Designed for Raspberry Pi 5 with driver-free, plug-and-play operation.
- Supports 2230, 2242, 2260 and 2280 NVMe SSDs and booting from SSD.
- Expands the PCIe interface to four USB 3.2 Gen1 ports for additional peripherals.
- Enables faster reading and writing than the Raspberry Pi TF card slot.
- Two status LEDs, a power monitoring chip and an EEPROM are integrated on the board.
Technical Features
- Host platform: Raspberry Pi 5.
- Host connection: PCIe Gen2 with one lane through a 16-pin connector.
- Expansion interfaces: 1 × M.2 M-Key and 4 × USB 3.2 Gen1.
- Storage protocol: NVMe.
- Supported M.2 sizes: 2230, 2242, 2260 and 2280.
- Form factor and mounting: HAT+, above the Raspberry Pi.
- Status indicators: 2 LEDs.
- Monitoring and configuration: onboard power monitoring chip and EEPROM.
Application Areas
- A Raspberry Pi 5 can boot its operating system from an attached NVMe SSD.
- SSD-based file storage can use the M.2 slot for read and write operations.
- Builds with multiple USB peripherals gain four additional USB connections.
Notes
- The M.2 slot supports only SSDs using the NVMe protocol.
- The Raspberry Pi 5 and SSD are not included.
What's Included
- 1 × PCIe TO M.2 USB HAT+
- 1 × 16-pin PCIe cable
- 1 × Screws pack
| Item information | Value |
|---|---|
| GTIN: | 4060137313110 |
| HAN: | 31436 |
| Category: | HATs |
| Manufacturer Part Number: | 31436 |
| Digital Interface Protocols: | PCIe Gen2; USB 3.2 Gen1; NVMe |
| Interface Type: | PCIe; M.2 M-Key; USB 3.2 Gen1 |
| FPC Pinanzahl: | 16 |
| LED-Anzahl: | 2 |
| Connector Type: | M.2 M-Key |
| Compatible Host SBC: | Raspberry Pi 5 |
| Carrier Form Factor: | HAT+ |
| Driver-Free Operation: | Ja |
| Host PCIe Interface: | 16-pin PCIe |
| Mounting Type: | Top-mounted |
| Included Accessories: | 1 × 16-pin PCIe cable; 1 × screws pack |
| Host PCIe Generation: | Gen2 |
| PCIe Lane Count: | 1 |
| Storage Interface Type: | M.2 |
| Storage Channel Count: | 1 |
| Supported Storage Protocol: | NVMe |
| Onboard EEPROM: | Ja |
| Plug and Play: | Ja |
| Onboard Status LEDs: | Ja |
| M2 Slot Count: | 1 |
| Compatible M2 Keying: | M-Key |
| Compatible M2 Form Factors: | 2230; 2242; 2260; 2280 |
| Supported Storage Protocols: | NVMe |
| Shipping weight: | 0,06 kg |
| Item weight: | 0,05 kg |
| Dimensions ( Length × Width ): | 8,50 × 5,65 cm |
Waveshare International Limited, World Trade Plaza south side, Fuhong Rd, Futian District, 518000 Shenzhen, China, [email protected], https://waveshare.com/