Raspberry Pi Pico RP2040, Dual ARM Cortex-M0+ @133MHz 264kB

Raspberry Pi Pico RP2040, Dual ARM Cortex-M0+

Raspberry Pi®

Raspberry Pi Pico RP2040, Dual ARM Cortex-M0+ @133MHz 264kB SRAM

Name: Raspberry Pi Pico RP2040, Dual ARM Cortex-M0+ @133MHz 264kB SRAM
Brand: Raspberry Pi®
SKU: RP01070
Price: 5.95 EUR
Availability: InStock

Item No.: RP01070

HAN: SC0915

EAN: 4060137067761

HS Code: 8537109199

Herkunftsland: JP

Lagerstufe: Tier3

5,95 €

per pcs

incl. 19% VAT plus (S)

Net: 5,00 €

Choose tax zone / country of delivery

Product Description

The Raspberry Pi foundation changed single-board computing when they released the Raspberry Pi computer, now they're ready to do the same for microcontrollers with the release of the brand new Raspberry Pi Pico. This low-cost microcontroller board features a powerful new chip, the RP2040, and all the fixin's to get started with embedded electronics projects at a stress-free price.

The Pico is 0.825" x 2" and can have headers soldered in for use in a breadboard or perfboard, or can be soldered directly onto a PCB with the castellated pads. There's 20 pads on each side, with groups of general purpose input-and-output (GPIO) pins interleaved with plenty of ground pins. All of the GPIO pins are 3.3V logic, and are not 5V-safe so stick to 3V! You get a total of 25 GPIO pins (technically there are 26 but IO #15 has a special purpose and should not be used by projects), 3 of those can be analog inputs (the chip has 4 ADC but one is not broken out). There are no true analog output (DAC) pins.

RP2040 Chip features:

Dual ARM Cortex-M0+ @ 133MHz
264kB on-chip SRAM in six independent banks
Support for up to 16MB of off-chip Flash memory via dedicated QSPI bus
DMA controller
Fully-connected AHB crossbar
Interpolator and integer divider peripherals
On-chip programmable LDO to generate core voltage
2 on-chip PLLs to generate USB and core clocks
30 GPIO pins, 4 of which can be used as analogue inputs
Peripherals
- 2 UARTs
- 2 SPI controllers
- 2 I2C controllers
- 16 PWM channels
- USB 1.1 controller and PHY, with host and device support
- 8 PIO state machines
Product Dimensions: 51.3mm x 21.0mm x 3.9mm
Product Weight: 3.0g

Dimensions and Weight
Item information	Value
GTIN:	4060137067761
HAN:	SC0915
Category:	Board
IEEE 802.15.4 Support:	Nein
microSD Card Slot:	Nein
CPU Core Count:	0
Flash Memory:	0
PSRAM:	0
GPIO Count:	0
Shipping weight:	0,01 kg
Item weight:	0,01 kg
Dimensions ( Length × Width × Height ):	2,10 × 5,13 × 0,39 cm