Varick St. 150
Unknown NY
New York, Vereinigte Staaten, 10013
[email protected]
https://eckstein-shop.de/Adafruit-Marken
Am Ostbahnhof 3
Niedersachsen
Clausthal-Zellerfeld, Deutschland, 38678
[email protected]
https://eckstein-shop.de
GTIN: | 4060137097294 |
HAN: | 5972 |
Category: | USB/I2C/SPI/UART |
Storage Tiers: | Neu |
Shipping weight: | 0,01 kg |
Item weight: | 0,01 kg |
Dimensions ( Length × Width × Height ): | 3,97 × 1,90 × 0,95 cm |
Adafruit Switchable USB Type A to C Breakout Board. This board is a little more advanced: you can manually switch each of the 4 wires on or off for a variety of uses:
- If you want to have a 'charge only' device, simply switch the D+ and D- lines off
- For power monitoring, you can do high side (disable the V+ line) or low side (disable the GND line)
- For tapping into the USB signal, or monitoring the power voltage, keep all the switches on and probe the labelled pads on either side
With the onboard 4-DIP switch, you can flip to your heart's content. Only thing to note is the C&K SDA04H1SBD switches are technically rated for 5V 100mA so we designed this for low-current-draw microcontroller project board hacking. (You could probably go a bit higher but don't tell anyone!)
Technical Details
- Product Dimensions: 39.7mm x 19.0mm x 9.5mm / 1.6" x 0.7" x 0.4"
- Product Weight: 4.9g / 0.2oz
Manufacturer according to GPSR
Adafruit Industries LLC, Varick St. 150, 10013 New York, Unknown NY, Vereinigte Staaten, [email protected], https://eckstein-shop.de/Adafruit-Marken
Responsible person according to GPSR
Eckstein GmbH, Am Ostbahnhof 3, 38678 Clausthal-Zellerfeld, Niedersachsen, Deutschland, [email protected], https://eckstein-shop.de