Product Description
Twisted Servo Y Splitter Cable 12" Female - 2x Female from Pololu distributes a single RC hobby servo signal to two identical outputs. It connects RC receivers or servo controllers to two devices that require the same control signal. All three ends use female JR connectors for compatible male headers or plugs. The split is close to the input, allowing the output ends to be positioned apart. Twisted wires reduce electromagnetic interference, while the 60-strand construction provides greater flexibility than standard servo cables.
Highlights
- Splits one RC servo signal into two identical outputs.
- Female JR connectors compatible with 2.54 mm headers, male JR connectors and male Futaba J connectors.
- Split near the input allows approximately 450 mm separation between output ends.
- Flexible 22-AWG wires with 60 strands per conductor.
- Twisted wires reduce electromagnetic interference.
Technical Features
- Cable length: 12 inches (300 mm).
- Configuration: one female connector to two female connectors.
- Connections: three 3-pin female JR connectors.
- Contact pitch: 0.1 inch (2.54 mm).
- Wire gauge: 22 AWG.
- Conductor construction: 60 strands per wire.
- Wire arrangement: twisted.
- Contact finish: gold-flashed.
- Maximum separation between output ends: approximately 18 inches (450 mm).
Application Areas
- Distribute the same RC receiver signal to two motor controllers with RC inputs.
- Connect an RC servo controller to two devices with compatible 3-pin male headers.
- Provide a common RC signal to a pair of Simple Motor Controllers operating with signal mixing enabled.
Notes
- The connectors are female under the contact-gender convention used here, although the RC hobby industry often calls this connector style male.
- Connection requires compatible 2.54 mm male headers, male JR connectors or male Futaba J connectors.
What's Included
- 1 x twisted servo Y splitter cable, 12 inches (300 mm), female to 2 x female.
| Item information | Value |
|---|---|
| GTIN: | 4060137043604 |
| HAN: | 2164 |
| Category: | Miscellaneous |
| Connector Ecosystem: | RC servo |
| Connector Type: | JR |
| Connector Pin Count: | 3 |
| Conductor Count: | 3 |
| Cable Length: | 300 |
| Header Pitch: | 2.54 |
| Wire Harness Configuration: | Female - 2x Female, twisted |
| End A Connector Description: | 1x 3-pin JR female |
| End B Connector Description: | 2x 3-pin JR female |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
Pololu Corporation, Pilot Rd. 920, 89119 Las Vegas, Nevada, Vereinigte Staaten, [email protected], https://www.pololu.com/