Product Description
The ESP32-P4-Pico Development Board without KIT is a platform for developing multimedia applications, human-machine interfaces and local data processing. Based on the ESP32-P4, it combines processing cores with hardware for image and voice processing. Camera and display modules connect through the MIPI interfaces, while additional peripherals connect through the pre-soldered headers.
The USB Type-C port provides power, programming and debugging access. The 40-pin connection is compatible with some Raspberry Pi Pico HATs. Secure Boot, Flash Encryption and cryptographic accelerators support applications that require protection of firmware and data.
Highlights
- 32-bit RISC-V processors with two high-performance cores and one low-power core
- Separate memory regions for high-performance and low-power operation, plus TCM
- Image processing with a JPEG codec, pixel accelerator, image signal processor and H.264 encoder
- 32 MB in-package PSRAM and 32 MB onboard NOR Flash
- Multimedia connections with MIPI-CSI, MIPI-DSI, USB 2.0 OTG and an SDIO 3.0 card slot
Technical Features
- Chip: ESP32-P4NRW32; RISC-V with two high-performance cores and one low-power core
- Maximum dual-core processor clock frequency: 400 MHz
- RAM and Flash: 32 MB PSRAM and 32 MB NOR Flash
- Internal memory: 128 KB HP ROM, 16 KB LP ROM, 768 KB HP L2MEM, 32 KB LP SRAM and 8 KB TCM
- Interfaces: 2-lane MIPI-CSI and MIPI-DSI, USB 2.0 OTG High Speed, SDIO 3.0, SPI, I2S, I2C, UART, TWAI, PWM, RMT and ADC
- GPIO connection: 2 × 20 pins, 27 remaining programmable GPIOs; pre-soldered headers
- Speaker connector: MX1.25-2P for 8 Ω, 2 W; onboard microphone
- Camera support: OV5647; display connection for 5, 7, 8 and 10.1-inch DSI screens
- Power and programming connection: USB Type-C
- KIT included: no
Application Areas
- Develop operator interfaces with a screen connected through MIPI-DSI.
- Capture images from an OV5647 sensor and process them with the integrated imaging hardware.
- Prototype voice and audio applications using the onboard microphone and a connected speaker.
- Connect peripherals through programmable GPIOs for local control tasks.
Notes
- The 40-pin connection is compatible with only some Raspberry Pi Pico HATs.
- The speaker connector is designed for an 8 Ω, 2 W speaker.
What's Included
- 1 × ESP32-P4-Pico with pre-soldered headers
| Item information | Value |
|---|---|
| GTIN: | 4060137027031 |
| HAN: | 32094 |
| Category: | Development Boards |
| Controller-IC: | ESP32-P4NRW32 |
| Manufacturer Part Number: | 32094 |
| Digital Interface Protocols: | MIPI-CSI, MIPI-DSI, USB 2.0 OTG, SDIO 3.0, SPI, I2S, I2C, UART, TWAI |
| Interface Type: | MIPI-CSI, MIPI-DSI, USB 2.0 OTG HS, SDIO 3.0, SPI, I2S, I2C, UART, TWAI, PWM, RMT, ADC |
| CPU Architecture: | 32-bit RISC-V |
| microSD Card Slot: | Ja |
| Camera Support: | Ja |
| Display Interface Type: | MIPI-DSI (2-lane) |
| USB Device Support: | Ja |
| USB Host Support: | Ja |
| USB Version: | 2highspeedotg |
| CPU Core Count: | 3 |
| Flash Memory: | 32 |
| PSRAM: | 32 |
| CPU Clock Frequency Max.: | 400 |
| GPIO Count: | 27 |
| Connector Type: | USB-C |
| Header Pins Soldered: | Ja |
| Compatible Camera Sensor: | OV5647 |
| CPU Configuration: | 2 HP cores + 1 LP core |
| MCU Family: | ESP32 |
| MCU Series: | ESP32-P4 |
| Onboard NAND Flash: | Nein |
| Target MCU Part Number: | ESP32-P4NRW32 |
| Debug Interface: | USB |
| Debug/Programming Interface: | USB Type-C |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Dimensions ( Length × Width × Height ): | 5,73 × 2,10 × 1,30 cm |
Waveshare International Limited, World Trade Plaza south side, Fuhong Rd, Futian District, 518000 Shenzhen, China, [email protected], https://waveshare.com/