Adafruit Grayscale 1.5inch 128x128 OLED Graphic Display

Item No.: AF4741

HAN: 4741

EAN: 4060137067150

HS Code: 8531202090

Herkunftsland: US

Lagerstufe: Maintain

35,70 $

per pcs

incl. 19% VAT plus (M)

Net: 30,00 $

Choose tax zone / country of delivery

Extended Services for Displays:
Customized solutions
Alternative solutions
Industrial PC solutions

More product details

Product Description

This display is a petite 1.5" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x128 individual grayscale OLED pixels, each one is turned on or off by the controller chip. Because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast; we really like these miniature displays for their crispness!

The driver chip, SSD1327 can communicate in two ways: I2C or SPI. The OLED itself requires a 3.3V and 12V power supply and 3.3V logic levels for communication. We include a 3.3V regulator and 12V boost converter, and all pins are fully level shifted so you can use with 3V or 5V devices!

If you are using I2C, we've included SparkFun qwiic compatible STEMMA QT connectors for the I2C bus so you don't even need to solder! Plug and play with any board that has a Qwiic or STEMMA QT connector for effortless prototyping and development. QT Cable is not included.

This display, being 16-level (4-bit) grayscale and 128x128, requires 128 * 128 * 4 bits = 8KB of SRAM to buffer. So you can't use it with a small chip such as the Arduino UNO (ATmega328 or 32u4). Pick a microcontroller or microcomputer with 16KB+ RAM - a SAMD21, SAMD51, ESP, nRF52, Teensy, etc will do an excellent job. As long as you have I2C or SPI interface available, you're good to go - SPI will be much faster but I2C requires fewer pins.

We have both Arduino and CircuitPython support for this display.

Please note that OLED displays are made of hundreds of...OLEDs! That means each pixel is a little organic LED, and if it's kept on for over 1000 hours it'll start to dim. If you want to keep the display uniformly bright, please turn off the display (set the pixels off) when it isn't needed to keep them from dimming.

Technical documents / Downloads

WikiManufacturer WikiOpen

Dimensions and Weight
Item information	Value
GTIN:	4060137067150
HAN:	4741
Category:	OLED/QLED
Interface/Connector:	SPI, I2C
Resolution:	128x128
Form/Type:	OLED/QLED
Display Size (inch):	1,5
Touchscreen:	Non-Touch
Platform:	Arduino*
RoHS Certificate:	compliant
Shipping weight:	0,02 kg
Item weight:	0,02 kg
Dimensions ( Length × Width × Height ):	5,00 × 4,00 × 0,40 cm

Write the first review for this item and help others make a purchase decision!

Wiki

Manufacturer according to GPSR
Adafruit Industries LLC, Varick St. 150, 10013 New York, New York, Vereinigte Staaten, [email protected], https://eckstein-shop.de/Adafruit-Marken