This small synchronous switching step-down (or buck) regulator takes an input voltage from 4 V to 36 V and efficiently reduces it to 3.3 V. The board measures only 17.8 mm x 17.8 mm yet delivers typical continuous output currents between 2 A and 2.6 A, depending on the input voltage, which makes this regulator well suited for powering moderate loads like sensors or small motors. An optional enable input can be used to put the regulator in a low-power state with a current draw of 5 µA to 10 µA per volt on VIN. The regulator also features reverse voltage protection and a power-good output indicates when the regulator cannot adequately maintain the output voltage.
Features
Input voltage:
4 V to 36 V for the version that outputs 3.3 V
[output voltage + dropout voltage] to 36 V for output voltages of 5 V and higher (see the dropout voltage section for details)
Fixed 3.3 V, 5 V, 6 V, 7.5 V, 9 V, or 12 V output (depending on regulator version) with 4% accuracy
Typical efficiency of 85% to 95%, depending on input voltage, output voltage, and load (see the efficiency graph below)
Switching frequency: ~400 kHz
Integrated reverse-voltage protection, over-current and short-circuit protection, over-temperature shutoff, and soft-start
1 mA typical no-load quiescent current; this can be reduced to approximately 5 µA to 10 µA per volt on VIN by disabling the board (see the quiescent current graph below)
“Power good” output indicates when the regulator cannot adequately maintain the output voltage
Compact size: 17.8 mm x 17.8 mm x 8 mm
Weight: 2.3 g (Without included optional headers.)
Two 0.086″ mounting holes for #2 or M2 screws
General specifications
Minimum operating voltage: 4 V
Maximum operating voltage: 36 V
Continuous output current: 2.3 A (Typical continuous output current at 24 V in. Actual achievable continuous output current is a function of input voltage and is limited by thermal dissipation. See the output current graph under the description tab for more information.)
Output voltage: 3.3 V
Reverse voltage protection?: Y
Maximum quiescent current: 1 mA (Quiescent current is typically under 1 mA for most of the operating range. )
Write the first review for this item and help others make a purchase decision!
Manufacturer according to GPSR Pololu Corporation, Pilot Rd. 920, 89119 Las Vegas, Nevada, Vereinigte Staaten, [email protected], https://www.pololu.com/
By selecting "Accept all", you give us permission to use the following services on our website: Strictly necessary cookies, YouTube, Vimeo, Google Map, PayPal Express Checkout und Ratenzahlung, Google Kundenrezensionen, GoAffPro Affiliate Tracking, Google Analytics 4, Google Ads Conversion Tracking. You can change the settings at any time (fingerprint icon in the bottom left corner). For further details, please see Individual configuration and our Privacy notice.
The settings you specify here are stored in the "local storage" of your device. The settings will be remembered for the next time you visit our online shop. You can change these settings at any time (fingerprint icon in the bottom left corner).
For more information on cookie lifetime and required essential cookies, please see the Privacy notice.
Would you like to see these contents? Activate the desired contents for one session only or allow the website to remember these settings. Once you have given your consent, the third-party data can be loaded. For this, third-party cookies might be stored on your device. You can change these settings at any time (fingerprint icon in the bottom left corner). For further details, please see the Privacy notice.