Product Description
The Pololu TB67S579FTG Stepper Motor Driver Carrier - Full Breakout is a stepper motor driver carrier board for one bipolar stepper motor based on Toshiba's TB67S579FTG driver IC. This board breaks out all TB67S579FTG inputs and outputs, making it suitable for evaluation, prototyping, and system integration where broad signal access is required. Control is provided through a simple STEP/DIR interface. The motor supply range is 4.5 V to 34 V, with 40 V as the absolute maximum. According to the source data, the board can deliver approximately 1.2 A per phase continuously without a heat sink or forced airflow, depending on supply voltage, and up to 2 A peak per phase.
The carrier supports seven step modes: full-step, non-circular half-step, circular half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step. Maximum current is set with an onboard potentiometer, allowing operation from supply voltages above the motor's rated voltage to achieve higher step rates. The TB67S579FTG also provides Advanced Dynamic Mixed Decay (ADMD), configurable Active Gain Control (AGC), and Automatic Wave Generation System (AWGS). An internal regulator eliminates the need for a separate logic supply, and the board can interface directly with both 3.3 V and 5 V systems. Protection features include under-voltage lockout, over-current protection, over-temperature protection, and reverse voltage protection. Active-low fault outputs assert for over-temperature, over-current, open-load, and motor stall conditions. Board size is 0.9 × 2.05 inches, approximately 22.9 × 52.1 mm. The PCB is a 2-layer design with 2 oz copper and includes an exposed solderable ground pad below the driver IC on the underside.
Technical Features
- TB67S579FTG bipolar stepper motor driver with all signals broken out for flexible electrical integration.
- STEP/DIR control interface simplifies motion control connection to microcontrollers and dedicated controllers.
- Seven step modes up to 1/32 microstepping support tuning of smoothness, resolution, and timing requirements.
- Potentiometer-based current limiting allows adjustment of maximum phase current to the motor and thermal budget.
- 4.5 V to 34 V operating supply range with 40 V absolute maximum supports a wide range of drive topologies.
- Built-in regulator and direct 3.3 V / 5 V logic compatibility reduce external support circuitry.
- ADMD, AGC, and AWGS add current-decay optimization, current reduction capability, and pseudo-sine generation functions.
- Reverse voltage protection, fault outputs, and protection circuitry improve robustness during development and operation.
Application Areas
This carrier board is suited for TB67S579FTG evaluation, custom motion-control electronics, laboratory setups, test fixtures, and compact motion axes using bipolar stepper motors. Typical use cases include CNC subsystems, robotics, laboratory automation, positioning systems, and other embedded motion applications that benefit from direct STEP/DIR control and access to all driver I/O signals.
What's Included
- 1x Pololu TB67S579FTG stepper motor driver carrier full breakout with all surface-mount components installed
- 1x TB67S579FTG driver IC installed on the board
| Item information | Value |
|---|---|
| GTIN: | 4060137011979 |
| HAN: | 5249 |
| Category: | Stepper Motor Driver |
| Operating Voltage Max. (V): | 34 |
| Operating Voltage Min. (V): | 4.5V |
| Continuous Output Current (A): | 1.2 |
| Output Current max. (mA): | 2000mA |
| Weight (g): | 4.7 |
| Controller-IC: | Toshiba TB67S579FTG |
| Interface Type: | STEP/DIR |
| Abmessungen (mm): | 52.1 x 22.9 mm |
| Header Pins Soldered: | Nein |
| Reverse Voltage Protection: | Ja |
| Carrier Form Factor: | Full Breakout |
| Microstep Max Divisor: | 32 |
| Microstep Resolutions: | Full-step, non-circular half-step, circular half-step, 1/4-step, 1/8-step, 1/16-step, 1/32-step |
| Current Limit Control Method: | Potentiometer |
| Board Width: | 22.9 |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Dimensions ( Length × Width ): | 2,29 × 5,21 cm |
Pololu Corporation, Pilot Rd. 920, 89119 Las Vegas, Nevada, Vereinigte Staaten, [email protected], https://www.pololu.com/