Product Description
The Industrial 1-Channel ESP32-S3 WiFi Relay Module combines a programmable relay output with wireless communication and an isolated RS485 interface. The ESP32-S3-Relay-1CH uses its onboard antenna. It is intended for developers building connected switching applications that integrate sensors or Modbus devices and require scheduled operation. An onboard real-time clock supports timed tasks.
The module requires a 5 V supply through USB-C or screw terminals. USB-C also provides firmware downloading and communication. Its protective enclosure mounts on a 35 mm rail, and Arduino development is supported.
Highlights
- ESP32-S3 with a dual-core Xtensa LX7 processor running at up to 240 MHz
- 2.4 GHz WiFi and Bluetooth 5 LE for wireless communication
- Relay contact rated up to 10 A at 250 V AC or 30 V DC
- Isolated RS485 interface for connecting Modbus modules and sensors
- Onboard real-time clock for scheduled tasks
Technical Features
- Controller: ESP32-S3R8, Xtensa LX7, 32-bit, 2 cores, up to 240 MHz
- Flash memory: 16 MB
- Wireless: IEEE 802.11 b/g/n WiFi at 2.4 GHz and Bluetooth 5 LE
- Interfaces: isolated RS485, USB-C, SH1.0 with GPIO1/GPIO2 and a 20-pin header with 2.00 mm pitch
- Relay: 1 channel, 1 normally open contact, maximum 10 A at 250 V AC or 30 V DC
- Power supply: 5 V DC through USB-C or screw terminals
- Antenna: onboard antenna
- Real-time clock: PCF85063
- RS485 termination resistor: 120 Ω, enabled by jumper
- Mounting: 35 mm rail
- Dimensions: 91.6 × 23.3 × 58.7 mm
Application Areas
- Switch connected loads by relay over WiFi or Bluetooth.
- Integrate RS485 Modbus sensors into connected control applications.
- Execute scheduled switching tasks using the onboard real-time clock.
- Visualize measurement and status data using MQTT or HTTP demonstration applications.
Notes
- The power input accepts 5 V only.
- The 120 Ω termination resistor is disconnected by default.
- The isolated side requires no additional power supply. Optocoupler isolation, digital isolation, power isolation, TVS, surge protection and ESD protection are integrated.
What's Included
- 1 x ESP32-S3-Relay-1CH
- 1 x SH1.0 4PIN cable, approximately 150 mm
- 1 x Screwdriver
| Item information | Value |
|---|---|
| GTIN: | 4060137026669 |
| HAN: | 32152 |
| Category: | Relay |
| Controller-IC: | ESP32-S3R8 |
| Manufacturer Part Number: | 32152 |
| Digital Interface Protocols: | Modbus, MQTT, HTTP |
| Interface Type: | RS485, USB-C, GPIO |
| CPU Architecture: | Xtensa LX7, 32-bit |
| Abmessungen (mm): | 91.6 × 23.3 × 58.7 |
| CPU Core Count: | 2 |
| Flash Memory: | 16 |
| CPU Clock Frequency Max.: | 240 |
| Connector Type: | USB-C |
| Bluetooth Version: | 5le |
| Wireless Protocols: | WiFi IEEE 802.11 b/g/n (2.4 GHz), Bluetooth 5 LE |
| Relay Channel Count: | 1 |
| Digital Input Channel Count: | 0 |
| Isolated Rs485 Interface: | 1 × RS485, isoliert |
| Protection Features: | Optokopplerisolation, digitale Isolation, Versorgungsisolation, TVS, Überspannungsschutz, ESD-Schutz |
| Antenna Type: | Integrierte Antenne |
| PoE Ethernet Port Count: | 0 |
| PoE Support: | Nein |
| Dc Input Voltage Min V: | 5 |
| Dc Input Voltage Max V: | 5 |
| Expansion Header Pin Count: | 20 |
| Mounting Type: | 35-mm-Tragschiene |
| Relay Contact Rating: | ≤10 A bei 250 V AC / 30 V DC; 1 NO |
| Enclosure Style: | Tragschienengehäuse |
| CAN Port Count: | 0 |
| Shipping weight: | 0,09 kg |
| Item weight: | 0,08 kg |
| Dimensions ( Length × Width × Height ): | 5,87 × 2,33 × 9,16 cm |
Waveshare International Limited, World Trade Plaza south side, Fuhong Rd, Futian District, 518000 Shenzhen, China, [email protected], https://waveshare.com/