1.27inch RGB OLED Display Module, 128x96 Resolution, 262K Colors, SPI Interface
- Size: 1.27"
- Resolution: 128x96
- RGB Backlight: 262K Colors
- Interface: SPI
- Display Panel: OLED
- Driver: SSD1351
Specifications
- Operating voltage: 3.3V / 5V
- Resolution: 128 x 96 pixels
- Communication Interface: 3/4-wire SPI
- Display size: 25.708 x 19.28mm
- DISPLAY PANEL: OLED
- PIXEL SIZE: 0.047 x 0.185mm
- Driver: SSD1351
- Module size: 42.2 x 29.0mm
Control Interface
- RES Reset, low active
- DC Data/Command selection (high for data, low for command)
- CS Chip selection, low active
- CLK Clock input
- DIN Data input
- GND Ground
- VCC Power (3.3V / 5V input)
Wiki:www.waveshare.com/wiki/1.27inch_RGB_OLED_Module
Lieferumfang
- 1.27inch RGB OLED Module x1
- GH1.25 7PIN cable x1
| Item information | Value |
|---|---|
| GTIN: | 4060137085505 |
| HAN: | 24691 |
| Category: | OLED/QLED |
| Interface/Connector: | SPI |
| Form/Type: | OLED/QLED |
| Touchscreen: | Non-Touch |
| Platform: | Arduino*, Raspberry Pi* |
| Resolution: | 128x96 |
| Display Size (inch): | 1.27 |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Dimensions ( Length × Width × Height ): | 4,22 × 2,90 × 1,00 cm |
Wiki
Waveshare International Limited, World Trade Plaza south side, Fuhong Rd, Futian District, 518000 Shenzhen, China, [email protected], https://waveshare.com/