Product Description
The Lyra Pi Linux Micro Development Board without Kit is based on the Core3506 core module with RK3506B. It is intended for developers implementing Linux applications with network communication, display connectivity and configurable peripheral interfaces. Three Cortex-A7 cores and one Cortex-M0 form its heterogeneous processor architecture. USB, Ethernet and a 40-pin GPIO header provide connections to external hardware.
The Luckfox Lyra Pi B W version includes Wi-Fi and Bluetooth and uses a TF card slot for storage. A memory card is required separately. The USB-C connection provides power and programming access, while Matrix IO enables application-specific assignment of peripheral signals.
Highlights
- Multiple high-speed interfaces including MIPI DSI, RMII, SDIO and USB.
- Rockchip Matrix IO with 98 multiplexed function signals.
- Onboard 2.4 GHz Wi-Fi 6 and Bluetooth 5.2 with BLE.
- Reserved header for a PoE module.
- USB hub with two USB-A host ports and an MX1.25 USB header.
Technical Features
- Processor: RK3506B with 3 × Arm Cortex-A7 at up to 1.2 GHz and 1 × Arm Cortex-M0.
- Memory: 512 MB DDR3L.
- Storage medium: TF/microSD card.
- Wireless: Wi-Fi 6 at 2.4 GHz, Bluetooth 5.2 and BLE.
- Networking: 2 × 10/100 Mbps Ethernet.
- Interfaces: USB 2.0 OTG via USB-C, 3 USB host channels via hub, 2-lane MIPI DSI, RMII, SDIO, PWM, UART, I2C, SPI, I2S, M.2 and 3.5 mm audio.
- GPIO: 23 Matrix IO pins and 5 additional GPIO pins on a 40-pin header.
- Display output: up to 1280 × 1280 pixels at 60 Hz.
- Audio: single-channel capture or output through the headphone/microphone jack.
- Kit: no.
Application Areas
- Develop Linux user interfaces with a display connected through MIPI DSI.
- Prototype network applications using two Ethernet connections and Wi-Fi.
- Connect sensors and actuators through configurable UART, I2C, SPI or PWM signals.
Notes
- The TF/microSD card and PoE module are not included.
- The M.2 slot supports only the SIM7600G-H-M.2; its USB signal is switched between the slot and MX1.25 header using a DIP switch.
- The GPIO header is compatible with some Raspberry Pi HATs.
- Shipping and technical support are prohibited for Russia, Belarus, Cuba, Iran, North Korea, Syria, and the Crimea, Donetsk and Luhansk regions of Ukraine. Export restrictions are subject to change.
What's Included
- 1 × Luckfox Lyra Pi B W
- 1 × IPX antenna, 2.4 GHz, 2 dB
- 1 × 4G module mounting screw
| Item information | Value |
|---|---|
| GTIN: | 4060137024245 |
| HAN: | 31542 |
| Category: | Miscellaneous (Teensy/STM32/32U4) |
| Controller-IC: | RK3506B |
| Manufacturer Part Number: | 31542 |
| Digital Interface Protocols: | USB 2.0, RMII, SDIO, MIPI DSI, PWM, UART, I2C, SPI, I2S |
| Interface Type: | USB, Ethernet, MIPI DSI, RMII, SDIO, GPIO, M.2, audio |
| CPU Architecture: | Arm Cortex-A7 + Arm Cortex-M0 |
| microSD Card Slot: | Ja |
| Display Interface Type: | MIPI DSI, 2-lane |
| USB Device Support: | Ja |
| USB Host Support: | Ja |
| USB Version: | 2.0 |
| CPU Core Count: | 4 |
| CPU Clock Frequency Max.: | 1200 |
| GPIO Count: | 28 |
| Wi-Fi Standard: | Wi-Fi 6 |
| Wi-Fi Frequency Bands: | 2.4GHz |
| Bluetooth Version: | 5.2 |
| Wireless Protocols: | Wi-Fi 6, Bluetooth 5.2, BLE |
| Wireless LAN Standard: | Wi-Fi 6 |
| CPU Configuration: | 3 × Cortex-A7 + 1 × Cortex-M0 |
| Ethernet Support: | Ja |
| Target MCU Part Number: | RK3506B |
| Debug/Programming Interface: | USB Type-C OTG |
| Shipping weight: | 0,06 kg |
| Item weight: | 0,05 kg |
| Dimensions ( Length × Width × Height ): | 8,50 × 5,60 × 1,80 cm |
Waveshare