Product Description
7.5inch E-Paper E-Ink Display HAT (B) For Raspberry Pi, 800x480 Pixels, Red / Black / White Three-Color, SPI Interface 7.5" E-PAPER HAT (B). Low Power Consumption, Wide Viewing Angle, Paper-Like Displaying Without Electricity. Ideal for price tags, shelf labels, industrial instruments...
- Size: 7.5"
- Resolution: 800x480
- Viewing Angle: >170°
- Display Color: Red / Black / White
- Grey Scale: 2
- Communication: SPI
- Display Panel: E-paper
- Experience: Paper-like
- Environment: Ambient Light Required
- Display Type: Passively Reflective
Features
- No backlight, keeps displaying last content for a long time even when power down
- Ultra low power consumption, basically power is only required for refreshing
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
- SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
- Onboard voltage translator, compatible with 3.3V / 5V MCUs
Specifications
- OPERATING VOLTAGE 3.3V/5V
- DISPLAY COLOR red, black, white
- INTERFACE 3-wire SPI, 4-wire SPI
- GREY SCALE 2
- OUTLINE DIMENSIONS 170.2 x 111.2mm
- FULL REFRESH TIME 16s
- DISPLAY SIZE 163.2 x 97.92mm
- REFRESH POWER 48mW (typ.)
- DOT PITCH 0.205 x 0.204mm
- STANDBY CURRENT <0.01uA (almost none)
- RESOLUTION 800 x 480 pixels
- VIEWING ANGLE >170°
Pinout
- VCC: 3.3V/5V
- GND: Ground
- DIN: SPI MOSI pin
- CLK: SPI SCK pin
- CS: SPI chip selection, low active
- DC: Data / Command selection (high for data, low for command)
- RST: External reset, low active
- BUSY: Busy status output, high active
* for Arduino UNO, due to its RAM limit, it is better to use a e-Paper Shield
WIKI: www.waveshare.com/wiki/7.5inch_e-Paper_HAT_(B)
Lieferumfang
Weight: 0.164 kg
- 7.5inch e-Paper HAT (B) x1
- RPi screws pack (2pcs) x1
- PH2.0 20cm 8Pin x1
