Product Description
The RP2350-Matrix Microcontroller Development Board combines an RP2350A with an RGB LED matrix and a motion sensor. It is intended for programmable lighting displays and experiments with acceleration- and angular-rate-based control. Developers can select either Arm Cortex-M33 or Hazard3 RISC-V architecture, with two processor cores available in either configuration.
The USB-C connector provides programming and USB communication. Multifunction GPIO pins connect external circuits, while the Dout pin supports RGB matrix expansion. Software development is supported in C/C++, MicroPython and the Arduino IDE. Programs can be transferred through the USB mass-storage programming mode.
Highlights
- Dual-core design with selectable Arm or RISC-V architecture
- 520 KB SRAM and 16 MB onboard Flash
- USB-C connector for programming and communication
- QMI8658 with three-axis accelerometer and three-axis gyroscope
- Onboard 8 × 8 RGB LED matrix with Dout expansion connection
Technical Features
- Processor: RP2350A, two Arm Cortex-M33 or two Hazard3 RISC-V cores, up to 150 MHz
- Memory: 520 KB SRAM and 16 MB Flash
- Display: RGB LED matrix with 8 × 8 pixels
- Motion sensor: QMI8658, 6 axes
- GPIO: 25 multifunction pins
- Interfaces: 1 × HSTX, 2 × SPI, 2 × I2C, 2 × UART and USB-C with USB 1.1
- Analog and PWM functions: 4 × 12-bit ADC and 16 controllable PWM channels
- USB roles: host and device
- Programmable input/output: 12 PIO state machines
- Voltage regulator: ME6217C33M5G, maximum output current 800 mA
- Development environments: C/C++, MicroPython and Arduino IDE
Application Areas
- The RGB LED matrix displays programmable color patterns and status indications.
- Acceleration and angular-rate measurements can control motion-dependent lighting patterns.
- Selectable processor cores enable experiments with Arm and RISC-V firmware projects.
- The PIO state machines support experiments with custom peripheral interfaces.
What's Included
- 1 × RP2350-Matrix
| Item information | Value |
|---|---|
| GTIN: | 4060137027765 |
| HAN: | 32225 |
| Category: | Board |
| Resolution: | 8 × 8 |
| Controller-IC: | RP2350A |
| Manufacturer Part Number: | 32225 |
| Digital Interface Protocols: | HSTX, SPI, I2C, UART, USB 1.1 |
| Interface Type: | USB 1.1, HSTX, SPI, I2C, UART, GPIO, ADC, PWM |
| CPU Architecture: | Arm Cortex-M33 / Hazard 3 RISC-V |
| Display Shape: | square |
| Display Technology: | LED |
| Display Resolution Height: | 8 |
| Display Resolution Width: | 8 |
| SRAM Memory: | 520 |
| Supported Programming Environments: | C/C++, MicroPython, Arduino IDE |
| USB Device Support: | Ja |
| USB Host Support: | Ja |
| USB Version: | 1.1 |
| CPU Core Count: | 2 |
| Flash Memory: | 16 |
| CPU Clock Frequency Max.: | 150 |
| GPIO Count: | 25 |
| Connector Type: | USB-C |
| Display Type: | RGB LED matrix |
| Onboard IMU Sensor IC: | QMI8658 |
| Onboard IMU Axis Count: | 6 |
| PIO State Machine Count: | 12 |
| CPU Configuration: | 2 × Arm Cortex-M33 or 2 × Hazard3 RISC-V |
| MCU Family: | RP2350 |
| MCU Series: | RP2350 |
| Target MCU Part Number: | RP2350A |
| Debug/Programming Interface: | USB mass storage |
| Shipping weight: | 0,00 kg |
| Item weight: | 0,00 kg |
| Dimensions ( Length × Width × Height ): | 2,50 × 2,50 × 0,55 cm |
Waveshare International Limited, World Trade Plaza south side, Fuhong Rd, Futian District, 518000 Shenzhen, China, [email protected], https://waveshare.com/