Product Description
Servo Y Splitter Cable 12" Female - 2x Male is a flat cable for connecting two servos to a single servo port on an RC receiver or servo controller. It serves assemblies where two servos need to share one connection. A female JR connector forms the input, while two male Futaba J connectors provide the outputs. Each end is compatible with JR- and Futaba-style connections, allowing use within either system or as an adapter between them. The split is close to the input, allowing the two output connectors to be separated by approximately 450 mm.
Highlights
- Connects two servos to a single servo port.
- Compatible with JR and Futaba connections and usable as an adapter between both systems.
- Split near the input allows approximately 450 mm separation between the outputs.
- 60 strands per conductor provide greater flexibility than standard servo cables.
- Connectors with gold-flashed contacts.
Technical Features
- Cable length: 12 inches, approximately 300 mm.
- Style: flat, with wires joined side by side.
- Connector configuration: 1 female JR to 2 male Futaba J connectors.
- Contact count: 3 per connector.
- Contact spacing: 0.1 inch, equivalent to 2.54 mm.
- Wire size: 22 AWG.
- Conductor construction: 60 strands per conductor.
- Maximum output connector separation: approximately 450 mm.
Application Areas
- Connecting two servos to a shared servo output on an RC receiver.
- Splitting one servo controller connection between two servos.
- Connecting equipment using JR and Futaba connector systems.
Notes
- Female and male refer to the electrical contacts. RC hobby terminology sometimes reverses these names because of the connector housing shape.
- The female JR connector fits 2.54 mm male headers; each male Futaba J connector contains three male contact pins.
What's Included
- 1 x Servo Y Splitter Cable 12" Female - 2x Male, 300 mm, flat.
| Item information | Value |
|---|---|
| GTIN: | 4060137043666 |
| HAN: | 2182 |
| Category: | Miscellaneous |
| Connector Ecosystem: | JR / Futaba |
| Connector Type: | JR / Futaba J |
| Connector Pin Count: | 3 |
| Conductor Count: | 3 |
| Cable Length: | 300 |
| Header Pitch: | 2.54 |
| Wire Harness Configuration: | Female - 2x Male, flat Y |
| End A Connector Description: | 1x JR female, 3-pin |
| End B Connector Description: | 2x Futaba J male, 3-pin |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
Shenzhen Harztec Technology Co., 309, 3F, Block B, Ganfeng Technology Building 1, No.993 Jiaxian Road, Xiangjiaotang Community, Bantian Street,, 518129 Shenzhen, China, [email protected], https://harztec.com