Product Description
Variant: ESP32-S3-POE-ETH-8DI-8DO.
Industrial ESP32-S3 Control Board with 8-Channel Digital Input & Output combines digital signal acquisition, external load control and industrial network communication. It serves applications connecting sensors, relays and distributed control components. Optocouplers, digital isolation and isolated power supplies separate external signal paths and communication interfaces.
Connections use screw terminals, USB Type-C and an Ethernet port, while Wi-Fi and Bluetooth LE provide wireless communication. Power can be supplied through the power terminal, USB or PoE. The enclosure supports installation on a 35 mm DIN rail. Arduino IDE is supported for programming.
Highlights
- Xtensa 32-bit LX7 dual-core processor running at up to 240 MHz.
- Integrated 2.4 GHz Wi-Fi and Bluetooth LE.
- Optocoupler-isolated Darlington outputs with up to 500 mA sink current per channel and flyback diode protection.
- Passive and active digital inputs with bidirectional optocoupler isolation and input-to-output linkage control.
- Isolated RS485 interface for connecting industrial Modbus modules and sensors.
Technical Features
- Processor: ESP32-S3, Xtensa LX7, 32-bit, dual-core, maximum 240 MHz.
- Default module: ESP32-S3-WROOM-1U-N16R8 with 16 MB flash and 8 MB PSRAM.
- Wireless: IEEE 802.11 b/g/n Wi-Fi at 2.4 GHz and Bluetooth 5 LE.
- Digital inputs: 8 channels, 5–36 V, passive or active NPN/PNP signals.
- Digital outputs: 8 channels, 5–40 V, maximum 500 mA sink current per channel.
- Interfaces: isolated RS485, isolated CAN, USB Type-C, SPI, TF card slot and 10/100 Mbps Ethernet through W5500.
- Power: 7–36 V DC through the screw terminal, 5 V through USB or IEEE 802.3af PoE.
- Bus termination: separate 120 Ω resistors for RS485 and CAN, enabled by jumpers.
- Enclosure: 35 mm DIN-rail mounting; dimensions 175 × 90 × 40 mm.
Application Areas
- Acquire digital sensor signals through passive or active NPN/PNP inputs.
- Drive external relays through current-sinking transistor outputs.
- Connect RS485 Modbus sensors and CAN devices to networked control systems.
- Visualize measurement and status data through MQTT with Waveshare.Cloud.
Notes
- The outputs are transistor outputs, not potential-free relay contacts.
- The RTC battery holder accepts only rechargeable size 1220 batteries rated at 3–3.3 V.
- The 120 Ω termination resistors are disconnected by default.
- The network switch shown in application images is not included.
What's Included
- 1 × ESP32-S3-POE-ETH-8DI-8DO
- 1 × 2.4 GHz 4 dB SMA antenna
- 1 × Screwdriver
| Item information | Value |
|---|---|
| GTIN: | 4060137052279 |
| HAN: | 32108 |
| Category: | USB/RS/CAN/LAN |
| Controller-IC: | ESP32-S3 |
| Manufacturer Part Number: | 32108 |
| Digital Interface Protocols: | RS485; CAN; SPI; USB; Ethernet |
| Interface Type: | RS485; CAN; Ethernet; USB Type-C; SPI |
| CPU Architecture: | Xtensa 32-bit LX7 |
| Abmessungen (mm): | 175 × 90 × 40 |
| microSD Card Slot: | Ja |
| Onboard RTC: | Ja |
| Supported Programming Environments: | Arduino IDE |
| CPU Core Count: | 2 |
| Flash Memory: | 16 |
| PSRAM: | 8 |
| CPU Clock Frequency Max.: | 240 |
| Connector Type: | USB Type-C |
| Wi-Fi Standard: | IEEE 802.11b/g/n |
| Wi-Fi Frequency Bands: | 2.4GHz |
| Bluetooth Version: | 5le |
| Wireless Protocols: | Wi-Fi; Bluetooth LE |
| Wireless LAN Standard: | IEEE 802.11 b/g/n |
| CPU Configuration: | Dual-core |
| MCU Family: | ESP32 |
| Ethernet Support: | Ja |
| MCU Series: | ESP32-S3 |
| Target MCU Part Number: | ESP32-S3 |
| Debug Interface: | USB Type-C |
| Debug/Programming Interface: | USB Type-C |
| Shipping weight: | 0,38 kg |
| Item weight: | 0,32 kg |
| Dimensions ( Length × Width × Height ): | 17,50 × 9,00 × 4,00 cm |
Waveshare International Limited, World Trade Plaza south side, Fuhong Rd, Futian District, 518000 Shenzhen, China, [email protected], https://waveshare.com/