Product Description
The Servo Y Splitter Cable 12" Female - 2x Female routes a single RC hobby servo signal to two identical outputs. It connects an RC receiver or servo controller to devices such as motor controllers with RC inputs. The flat cable keeps its wires joined side by side, with the split located close to the single input end. All three ends use JR-style female connectors and require matching male headers or plugs.
Highlights
- Splits one RC servo signal into two identical outputs.
- JR-style female connectors at all three ends, compatible with male JR and Futaba J connectors.
- Output ends can be separated by approximately 450 mm.
- Each conductor uses 60 strands for greater flexibility than standard servo cables.
- Gold-flashed contacts on a 2.54 mm pitch.
Technical Features
- Cable length: 12 inches, nominal length 300 mm.
- Style: flat, with wires joined side by side.
- Connection configuration: 1 female to 2 female.
- Connectors: 3 three-pin JR-style female connectors.
- Contact pitch: 2.54 mm, equivalent to 0.1 inch.
- Wire gauge: 22 AWG.
- Conductor construction: 60 strands per wire.
- Maximum output-end separation: approximately 450 mm.
- Contact finish: gold flash.
Application Areas
- Distribute one RC receiver signal to two motor controllers with RC inputs.
- Connect an RC servo controller to two devices through three-pin male headers.
- Supply the same RC signal to a pair of Simple Motor Controllers operating together with signal mixing enabled.
Notes
- The female connectors are sometimes called “male” in the RC hobby industry; female here refers to the contact gender.
- Mating connections are 2.54 mm male headers, male JR connectors or male Futaba J connectors.
What's Included
- 1 × Servo Y Splitter Cable 12" Female - 2x Female, flat, 300 mm.
| Item information | Value |
|---|---|
| GTIN: | 4060137043673 |
| HAN: | 2183 |
| Category: | Miscellaneous |
| Connector Ecosystem: | JR / Futaba J |
| Connector Type: | JR |
| Connector Pin Count: | 3 |
| Conductor Count: | 3 |
| Cable Length: | 300 |
| Header Pitch: | 2.54 |
| Wire Harness Configuration: | Female - 2x Female, flat |
| End A Connector Description: | 1 × JR female, 3-pin |
| End B Connector Description: | 2 × JR female, 3-pin |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
Shenzhen Harztec Technology Co., 309, 3F, Block B, Ganfeng Technology Building 1, No.993 Jiaxian Road, Xiangjiaotang Community, Bantian Street,, 518129 Shenzhen, China, [email protected], https://harztec.com