Waveshare Wireless GSM GPRS GNSS Bluetooth HAT for Raspberry Pi Based on SIM868

Artikelnummer: WS13460

EAN: 4060137038846

HAN: 13460

Herkunftsland: CN

TARIC-Code: 85176990000

GSM/GPRS/GNSS/Bluetooth HAT for Raspberry Pi, Based on SIM868

Kategorie: GSM/GPRS


35,09 €

inkl. 16% USt.,

sofort verfügbar

Lieferfrist: ca. 1 - 2 Tage

1


Beschreibung

Note: the Raspberry Pi in the photo is NOT included

Overview

This is a handy, low power Raspberry Pi HAT which features multi communication functionalities: GSM, GPRS, GNSS and Bluetooth.

It allows your Pi to easily make a telephone call, send messages, connect to wireless Internet, global position, transfer data via Bluetooth, and so on.

Features

General

  • Raspberry Pi connectivity, compatible with Raspberry Pi 2B/3B/Zero/Zero W
  • Supports SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc.
  • Support GPS, COMPASS, Glonass, LBS base station positioning, omni-positioning
  • Bluetooth 3.0, supports data transferring through Bluetooth
  • Onboard USB TO UART converter CP2102 for UART debugging
  • 6x LEDs for indicating the module working status
  • SIM card slot for 1.8V/3V SIM card
  • RTC with backup battery holder
  • Baudrate auto detection (1200bps ~115200bps)
  • Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)
  • Supports SIM application toolkit: GSM 11.14 Release 99
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

GSM/GPRS

  • Band
    • GSM 850/EGSM 900/DCS 1800/PCS 1900 MHz
    • Quad-band auto search
    • Compliant to GSM phase 2/2+
  • Emitting power
    • Class 4 (2W @ GSM 850/EGSM 900 MHz)
    • Class 1 (1W @ DCS 1800/PCS 1900 MHz)
  • GPRS connectivity
    • GPRS multi-slot class 12 (default)
    • GPRS multi-slot class 1~12 (configurable)
  • GPRS data feature
    • Downlink speed: max 85.6kbps
    • Uplink speed: max 85.6kbps
    • Coding schemes: CS-1\CS-2\CS-3\CS-4
    • Supports PAP (Password Authentication Protocol) for PPP connection
    • Supports PBCCH
    • Supports USSD
  • SMS
    • Supports: MT/MO/CB/Text/PDU mode
    • SMS storage: SIM card
  • Audio
    • Voice encode/decode mode: Half Rate\Full Rate\Enhanced Full Rate\Adaptive muti rate
    • Supports echo cancellation
    • Supports noise reduction

GNSS

  • Receiver type
    • 33 tracking channels
    • 99 acquisition channels
    • GPS L1 C/A code
  • Sensitivity
    • Tracking: -165 dBm
    • Cold starts : -148 dBm
  • Time-To-First-Fix
    • Cold starts : 28s (typ.)
    • Hot starts : < 1s
    • Warm starts: 26s
  • Accuracy
    • Horizontal position : <2.5m CEP

Bluetooth

  • Integrates AT commands
  • Compliant to Bluetooth specification3.0 + EDR
  • Supports SPP, OPP, HFP/HSP, etc.

Misc

  • Operating voltage: 5V
  • Operating temperature: -40°C ~ 85°C
  • Storage temperature: -45°C ~ 90°C
  • Dimensions: 30.2mm x 65mm

What's on Board

 

  1. SIM868 module
  2. ZMM5V1: regulator diode
  3. SMF05C: TVS diode
  4. CP2102: USB TO UART converter
  5. MP1482: power chip
  6. NDC7002N: voltage level translator
  7. GPS status indicator
  8. NET indicator:
    • flashes fast when the module starts up
    • flashes slowly after GSM register succeed
  9. STA module working status indicator
  10. SIM868 UART Tx/Rx indicator
  11. Power indicator
  12. SIM868 control button: press the button and hold for 1s, to startup/shutdown the SIM868
  13. Raspberry Pi GPIO connector
  14. SIM card slot
  15. USB TO UART interface
  16. 3.5mm earphone/mic jack
  17. GNSS antenna connector
  18. Bluetooth antenna connector
  19. GSM antenna connector
  20. RTC backup battery holder
  21. UART selection switch
    • A: control the SIM868 through USB TO UART
    • B: control the SIM868 through Raspberry Pi
    • C: access Raspberry Pi through USB TO UART

Dimension

Lieferumfang

1x GSM/GPRS/GNSS HAT

1x GSM Antenna

1x GPS External Antenna (B)

1x Bluetooth Antenna

1x USB type A plug to micro plug cable

1x RPi screws pack (2pcs)

Dokumente

Wiki

GSM GPRS GNSS HAT Schematic

SIM800 AT Command Manual

Bewertungen (0)

Durchschnittliche Artikelbewertung

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufenscheidung:


Diese Modul passt zu folgende Produkten:
Raspberry Pi 3 Model B+ (plus) BCM2837B0 SoC, IoT, PoE... Raspberry Pi 3 Model B+ (plus) BCM2837B0 SoC, IoT, PoE...
momentan nicht verfügbar
Raspberry Pi 3 Model B, 1,2 GHz 1GB RAM ARMv8 Board Raspberry Pi 3 Model B, 1,2 GHz 1GB RAM ARMv8 Board
sofort verfügbar
ähnliche Produkte:
Waveshare GSM GPRS Bluetooth HAT for Raspberry Pi Waveshare GSM GPRS Bluetooth HAT for Raspberry Pi
sofort verfügbar
Kunden kauften dazu folgende Produkte
Raspberry Pi 3 Model B+ (plus) BCM2837B0 SoC, IoT, PoE... Raspberry Pi 3 Model B+ (plus) BCM2837B0 SoC, IoT, PoE...
momentan nicht verfügbar
HC-SR04 Abstandsmessung Ultraschall Ultrasonic Sensor Module HC-SR04 Abstandsmessung Ultraschall Ultrasonic Sensor Module
sofort verfügbar
Raspberry Pi Kühler Cooler Kühlkörper 3 Stk. Raspberry Pi Kühler Cooler Kühlkörper 3 Stk.
sofort verfügbar
HIMALAYA basic Pro micro 5V 16MHz Arduino mini Leonardo... HIMALAYA basic Pro micro 5V 16MHz Arduino mini Leonardo...
sofort verfügbar
LiPo Akku Lithium-Ion Polymer Batterie 3,7V 1200mAh... LiPo Akku Lithium-Ion Polymer Batterie 3,7V 1200mAh...
sofort verfügbar