Waveshare Open429Z-D Package A Development Board Cortex-M4 Entwicklungskit STM32F429I-DISCO

Item number: WS0102A

MPN: Open429Z-D Package A

Category: STM32

132,08 €

including 19% VAT.,

Short supply

Shipping time: 3 - 5 workdays



STM32 development board designed for the ST official tool STM32F429I-DISCO, and integrates various standard interfaces, pretty easy for peripheral expansions.


Open429Z-D is an STM32 development board designed for the ST official tool STM32F429I-DISCO, which features the STM32F429ZIT6 microcontroller onboard.

The Open429Z-D supports further expansion with various optional accessory boards for specific application. The modular and open design makes it the ideal for starting application development with STM32 series microcontrollers.

What's on the mother board

STM32F429ZIT6 development board on board resource
  1. STM32F429I-DISCO socket: for easily connecting the STM32F429I-DISCO
  2. MCU pins connector: all the MCU I/O ports are accessible on expansion connectors for further expansion
  3. USB connector: USB to UART via the onboard convertor PL2303
  4. I2C1/I2C2 interface: easily connects to I2C peripherals such as I/O expander (PCF8574), FRAM (FM24CLxx), etc.
  5. I2S2/I2S3/I2C1 interface: easily connects to I2S peripherals such as audio module, etc.
  6. DCMI interface: for connecting camera
  7. SDIO interface: for connecting Micro SD module, features much faster access speed rather than SPI
  8. CAN1 interface: communicates with accessory boards which feature the CAN device conveniently
  9. CAN2 interface: communicates with accessory boards which feature the CAN device conveniently
  10. UART3 interface: easily connects to RS232, RS485, USB TO 232, etc.
  11. SPI1/SPI4 + AD/DA interfaces:
    • easily connects to SPI peripherals such as DataFlash (AT45DBxx), SD card, MP3 module, etc.
    • easily connects to AD/DA modules (SPI1 features AD/DA alternative function)
  12. UART2 interface: easily connects to RS232, RS485, USB TO 232, etc.
  13. 8-bit FMC interface: easily connects to peripherals such as NandFlash
  14. SAI1 interface: for connecting audio modules like UDA1380 module
  15. ONE-WIRE interface: easily connects to ONE-WIRE devices (TO-92 package), such as temperature sensor (DS18B20), electronic registration number (DS2401), etc.
  16. 5V DC jack
  17. 5V/3.3V power input/output: usually used as power output, also common-grounding with other user board
  18. JTAG/SWD interface: for debugging/programming
  19. Joystick jumper
    • short the jumper to connect the joystick to default I/Os used in example code
    • open the jumper to connect the joystick to custom I/Os via jumper wires
  20. Boot mode switch: for configuring BOOT0 pin
  21. USB to UART jumper
  22. AMS1117-3.3: 3.3V voltage regulator
  23. PL2303: USB to UART convertor
  24. 5V DC power switch
  25. Power indicator
  26. UART1 indicator
  27. Joystick: five positions

What's on the STM32F429I-DISCO

  • STM32F429ZIT6 microcontroller featuring 2 MB of Flash memory, 256 KB of RAM in an LQFP144 package
  • On-board ST-LINK/V2 with selection mode switch to use the kit as a standalone
  • ST-LINK/V2 (with SWD connector for programming and debugging)
  • Board power supply: through the USB bus or from an external 3 V or 5 V supply voltage
  • 2.4" QVGA TFT LCD
  • SDRAM 64 Mbits
  • L3GD20, ST MEMS motion sensor, 3-axis digital output gyroscope
  • Six LEDs:
    • LD1 (red/green) for USB communication
    • LD2 (red) for 3.3 V power-on
    • Two user LEDs:LD3 (green), LD4 (red)
    • Two USB OTG LEDs:LD5 (green) VBUS and LD6 (red) OC (over-current)
  • Two pushbuttons (user and reset)
  • USB OTG with micro-AB connector
  • Extension header for LQFP144 I/Os for a quick connection to the prototyping board and an easy probing
STM32F429I-DISCO what's onboard
STM32F429I-DISCO what's onboard


JTAG/SWD interfaces

The figure 1, and 2 show the header pinouts of JTAG/SWD interface

Figure 1. JTAG Header Pinout
JTAG Header Pinout
Figure 2. SWD Header Pinout
SWD Header Pinout

Development Resources

The User Guide CD includes development resources listed as follows:

  • Schematic
  • Demo code (examples in C, µC/OS-II)
  • Related software (KEIL etc.)
  • STM32 Datasheets
  • STM32 development documentations

Package Contains

The "Standard Package" and "Accessory Boards Package" below are included.

Standard Package

  1. Open429Z-D mother board x 1
  2. 4-pin 2-pin wires pack x 1
  3. USB power cable x 1
  4. User Guide CD x 1

Accessory Boards Package

  1. STM32F429I-DISCO x 1
  2. UDA1380 Board x 1
  3. Analog Test Board x 1
  4. Micro SD Storage Board x 1
  5. OV2640 Camera Board x 1
  6. NandFlash Board (A) x 1
  7. USB type A plug to mini-B plug cable x 1

Ratings (0)

Average product review

Write your first review and help others with their purchase decision:

Question on item

Question on item