Waveshare Open407V-C Package B Development Board Cortex-M4 Entwicklungskit STM32F407

Artikelnummer: WS0105B

HAN: Open407V-C Package B

Kategorie: STM32


152,31 €

inkl. 19% USt.,

knapper Lagerbestand

Lieferzeit: 8 bis 10 Tage

Packung


Beschreibung

STM32 development board designed for STM32F407V series, features the STM32F407VET6 MCU, and integrates various standard interfaces, pretty easy for peripheral expansions.


Overview

Open407V-C is an STM32 development board designed for the STM32F407VET6 microcontroller, consists of the mother board and the MCU core boardCore407V.

The Open407V-C supports further expansion with various optional accessory boards for specific application. The modular and open design makes it the ideal for starting application development with STM32F4 series microcontrollers.


What's on the mother board

STM32F407VET6 development board on board resource
  1. MCU core board connector: for easily connecting the Core407V
  2. ULPI interface: for connecting high-speed USB peripheral (the STM32F407V integrates USB HS controller without any PHY device)
  3. FSMC + SPI interface (16-bit FSMC + SPI): for connecting touch screen LCD
  4. FSMC interface (8-bit FSMC): easily connects to peripherals such as NandFlash, Ethernet, etc.
  5. SPI1/SPI2 + AD/DA interface
    • easily connects to SPI peripherals such as DataFlash (AT45DBxx), SD card, MP3 module, etc.
    • SPI1 features AD/DA alternative function, supports connecting AD/DA module as well
  6. SDIO interface: for connecting Micro SD module, features much faster access speed rather than SPI
  7. I2S2/I2S3/I2C1: for connecting I2S peripherals, such as Audio module
  8. USART2 interface: easily connects to RS232, RS485, USB TO 232, etc.
  9. CAN1 interface: communicates with accessory boards which feature the CAN device conveniently
  10. CAN2 interface: communicates with accessory boards which feature the CAN device conveniently
  11. I2C1/I2C2 interface: easily connects to I2C peripherals such as I/O expander (PCF8574), FRAM (FM24CLxx), etc.
  12. DCMI interface: for connecting digital camera
  13. UART3 interface: easily connects to RS232, USB TO 232, etc.
  14. Ethernet interface: easily connects the MCU to ethernet network by using an additional ethernet module
  15. ONE-WIRE interface: easily connects to ONE-WIRE devices (TO-92 package), such as temperature sensor (DS18B20), electronic registration number (DS2401), etc.
  16. 5V DC jack
  17. 5V/3.3 V power input/output: usually used as power output, also common-grounding with other user board
  18. MCU pins connector: VCC, GND, and all the I/O ports are accessible on expansion connectors for further expansion
  19. SD Card Detect jumper
  20. LEDs jumper
    • short the jumper to connect to default I/Os used in example code
    • open the jumper to connect to custom I/Os via jumper wires
  21. User key/Wake-Up button jumper
    • short the jumper to connect to default I/Os used in example code
    • open the jumper to connect to custom I/Os via jumper wires
  22. Joystick jumper
    • short the jumper to connect to default I/Os used in example code
    • open the jumper to connect to custom I/Os via jumper wires
  23. LCD backlight adjustment jumper
    • short the jumper to enable LCD backlight adjustment
    • open the jumper to disable and disconnect from the I/O ports
  24. LEDs: convenient for indicating I/O status and/or program running state
  25. User key: convenient for I/O input and/or interact with running code
  26. Wake-Up button: wake up the STM32 MCU from sleep mode, also used as regular user key
  27. Joystick: convenient for I/O input (five positions)

What's on the Core407V

STM32F407VET6 development board on board resource
  1. STM32F407VET6: the high performance STM32 MCU which features:
    • Core: Cortex-M4 32-bit RISC
    • Feature: a full set of single-cycle DSP instructions
    • Operating Frequency: 168MHz, 210 DMIPS/1.25 DMIPS/MHz
    • Operating Voltage: 1.8V-3.6V
    • Package: LQFP100
    • Memories: 512kB Flash, 192+4kB SRAM
    • MCU communication Interfaces:
      • 3 x SPI, 3 x USART, 2 x UART, 2 x I2S, 3 x I2C
      • 1 x FSMC, 1 x SDIO, 2 x CAN
      • 1 x USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, ULPI and on-chip full-speed PHY
      • 1 x 10/100 Ethernet MAC
      • 1 x 8 to 12-bit parallel camera interface
    • AD & DA converters: 3 x AD (12-bit, 1µs, shares 24 channels); 2 x DA (12-bit)
    • Debugging/Programming: supports JTAG/SWD (serial wire debug) interfaces, supports IAP
  2. AMS1117-3.3 (on bottom side): 3.3V voltage regulator
  3. MIC2075 (on bottom side): onboard USB power management device
  4. Power supply switch, powered from 5Vin or USB connection
  5. Boot mode switch, for configuring BOOT0 pin
  6. Power indicator
  7. Reset button
  8. 8M crystal oscillator
  9. 32.768K crystal (on bottom side), for internal RTC with calibration
  10. JTAG/SWD interface: for debugging/programming
  11. USB connector, used for establishing USB communication between PC and the STM32 development board
  12. IO expander (including VCC/GND), all the MCU pins are accessible on expansion connectors for further expansion
  13. 5Vin pinheader, 5V power supply is required when using USB HOST/OTG
  14. USB jumper
    • short the jumper when using USB
    • open the jumper to disconnect from I/O ports
  15. VBAT selection jumper
    • short the jumper to use system power supply
    • open the jumper to connect the VBAT to external power, such as battery
  16. VREF selection jumper
    • short the jumper to connect VREF+/VREF- to VCC/GND
    • open the jumper to connect VREF+/VREF- to other custom pin via jumper wire

Note: 
The Open407V-C supports programming via STM32 UART bootloader, a USB TO UART accessory board is also provided in the package. 
The Open407V-C does NOT integrate any debugging function, a debugger is required.


JTAG/SWD interfaces

The figure 1, and 2 show the header pinouts of JTAG/SWD interface

Figure 1. JTAG Header Pinout
JTAG Header Pinout
Figure 2. SWD Header Pinout
SWD Header Pinout

Development Resources

The User Guide CD includes development resources listed as follow:

  • Related software (KEIL etc.)
  • Demo code (examples in C, µC/OS-II)
  • Schematic (PDF)
  • STM32 development documentations (Datasheet etc.)

Package Contains

The "Standard Package" and "Accessory Boards Package" below are included.

Standard Package

  1. Open407V-C development board x 1
  2. PL2303 USB UART Board (mini) x 1
  3. USB type A plug to mini-B plug cable x 1
  4. USB type A receptacle to mini-B plug cable x 1
  5. 4-pin wire x 2
  6. 2-pin wire x 2
  7. USB power cable x 1
  8. User Guide CD x 1

Accessory Boards Package

  1. 3.2inch 320x240 Touch LCD x 1
  2. USB3300 USB HS Board (ULPI) x 1
  3. DP83848 Ethernet Board (ETH) x 1
  4. NandFlash Board (A) (FSMC) x 1
  5. OV7670 Camera Board (DCMI) x 1
  6. Micro SD Storage Board (SDIO/SPI) x 1
  7. AT45DBXX DataFlash Board (SPI+IOs) x 1
  8. FM24CLXX FRAM Board (I2C) x 1
  9. UDA1380 Board (I2S+I2C) x 1
  10. VS1003B MP3 Board (SPI+IOs) x 1
  11. Analog Test Board (for AD/DA testing) x 1
  12. SN65HVD230 CAN Board (CAN) 2pcs x 1
  13. NRF24L01 RF Board (B) (SPI+IOs) 2pcs x 1
  14. Ethernet Cable x 1

Bewertungen (0)

Durchschnittliche Artikelbewertung

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufenscheidung:

Frage zum Produkt

Frage zum Produkt