Waveshare L76X Multi-GNSS Module, GPS, BDS, QZSS

Artikelnummer: WS16332

Kategorie: Module


16,99 €

inkl. 19% USt.,

14 Packung auf Lager

Lieferfrist: ca. 1 - 3 Tage

Packung


Beschreibung

Overview

This is a general GNSS module which supports Multi-GNSS systems: GPS, BDS, and QZSS, with advantages such as fast positioning, high accuracy, low power consumption, and so on.

Specifcation

  • Supports Multi-GNSS systems: GPS, BDS, and QZSS
  • EASY?, self track prediction technology, help quick positioning
  • AlwaysLocate?, intelligent controller of periodic mode for power saving
  • Supports DGPS, SBAS (WAAS/EGNOS/MSAS/GAGAN)
  • UART communication baudrate: 4800~115200bps (9600bps by default)
  • Onboard rechargeable Li battery MS621FE, for preserving ephemeris information and hot starts
  • 2x LEDs for indicating the module working status
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

GNSS Specifications

  • Band: GPS L1(1575.42Mhz), BD2 B1 (1561.098MHz)
    • Channels: 33 tracking ch, 99 acquisition ch, 210 PRN ch
    • C/A code
    • SBA: WAAS, EGNOS, MSAS, GAGAN
  • Horizontal position accuracy:
    • Autonomous: <2.5mCEP
  • Time-To-First-Fix @-130dBm (EASY? enabled):
    • Cold starts: <15s
    • Warm starts: <5s
    • Hot starts: <1s
  • Sensitivity:
    • Acquisition: -148dBm
    • Tracking: -163dBm
    • Re-acquisition: -160dBm
  • Dynamic performance:
    • Altitude (max): 18000m
    • Velocity (max): 515m/s
    • Acceleration (max): 4G

General Specifications

  • Communication interface: UART
  • Baudrate: 4800~115200bps (9600bps by default)
  • Update rate: 1Hz (default), 10Hz (max)
  • Protocols: NMEA 0183, PMTK
  • Power supply voltage: 5V / 3.3V
  • Operating current: 11mA
  • Operating temperature: -40? ~ 85?
  • Dimensions: 32.5mm x 25.5mm

Applications

  • Vehicle tracking
  • Asset tracking
  • Security system
  • Industrial PDA
  • GIS application

What's on Board

L76X GPS Module on board resource

  1. L76B module
  2. RT9193-33: power manager
  3. Rechargeable MS621FE Li battery: for preserving ephemeris information and hot starts
  4. Ceramics active antenna
  5. GPS status indicator
  6. Power indicator
  7. PH2.0 5PIN connector
  8. GNSS antenna connector
  9. Backup mode wakeup jumper: not soldered by default, short the jumper to exit backup mode

Pinouts

PIN NO. SYMBOL DESCRIPTION
1 VCC Power supply (3.3V/5V input)
2 GND Ground
3 TX Connect to MCU.RX (signal direction: TX >> MCU.RX)
4 RX Connect to MCU.TX (signal direction: MCU.TX >> RX)
5 PPS GPS status indicator

Dimension

Package List

1x L76X GPS Module
1x PH2.0 5PIN wire

Dokumente

User Manual

Schematic

Code

Github

Quectel_GNSS_Flash_EPO_Application_Note_V1.0

Quectel_GNSS_FOTA_User_Guide_V1.0

Bewertungen (0)

Durchschnittliche Artikelbewertung

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufenscheidung:

----

Diese Modul passt zu folgende Produkten:
Waveshare L76X Multi-GNSS HAT for Raspberry Pi, GPS, BDS,... Waveshare L76X Multi-GNSS HAT for Raspberry Pi, GPS, BDS,...
19 Packung auf Lager
Kunden kauften dazu folgende Produkte
JST-XH 2,54mm Kit Stecker & Buchse (460 Stück) JST-XH 2,54mm Kit Stecker & Buchse (460 Stück)
68 auf Lager
Adafruit uFL SMT Antenna Connector Adafruit uFL SMT Antenna Connector
3 bestellt, am 25.07.2019 erwartet
Adafruit Wireless Feather M0 with RFM95 LoRa Radio - 900MHz Adafruit Wireless Feather M0 with RFM95 LoRa Radio - 900MHz
2 bestellt, am 25.07.2019 erwartet
Makeblock USB 2.0 A-Male to Micro B-Male Cable
5 Packung auf Lager
Adafruit LED Sequins - Warm White - Pack of 5 Adafruit LED Sequins - Warm White - Pack of 5
2 bestellt, am 25.07.2019 erwartet