Waveshare Atmel AT AVRISP AVR ISP XPII In-System Programmer ATAVRISP2 AVRISP mkII Compliant

Item number: WS9214E

SKU: USB AVRISP XPII

L71

Category: Programmers & Debuggers


44,02 €

including 19% VAT.,

Available now!

Shipping time: 1 - 3 workdays



Description

  • AVR ISP Programmer, compatible with AT AVRISP mkII from ATMEL
  • A professional In-System Programmer. Supports all AVR devices with ISP or PDI interface, including XMEGA
  • Supports AVR Studio 4/5/6 or higher version (delivered with firmware for AVR Studio 5, can be updated to support other AVR Studio versions)

Features

  • Supports all AVR devices with ISP or PDI interface, and certain 51 Devices
  • Programs both Flash and EEPROM
  • Supports Fuses and Lock Bit Programming
  • Based on AT AVRISP mkII firmware
  • Upgradable to Support Future Devices
  • Adjustable ISP programming speed up to 8M frequency
  • USB 2.0 compliant (full speed, 12Mbps)
  • 3 optional cables to target board
  • Powered from USB bus, does not require external power supply


Connecting USB AVRISP XPII to the target board
(Click on the image to enlarge)

AT AVRISP mkII compliant
- Compatible with AT AVR ISP, easy to use, stable and reliable

Based on AT AVRISP mkII firmware
- Identified as AVRISP mkII in AVRStudio, high speed programming

Upgradable firmware
- Firmware is upgradable to Support Future Devices
- Automatic Upgrade

Supported software
- AVR Studio 4/5/6 or WINAVR(GCC) is used as front-end software
- Supports the program files generated by IAR, ICCAVR, CVAVR

Device Support
- USB AVRISP XPII supports all AVR devices with ISP and PDI Interface. Support for new devices will be added with new versions of AVR Studio.
- Supports AT86RF401/AT89S51/AT89S52

Refer to AVR Studio 6, the following devices are supported:


Supports all the different voltages and speed grade versions of the devices listed in the table above.
Check more supported devices : UC3, Mega, SAM , Tiny, Xmega

Performance
- High speed programs FLASH , EEPROM, Fuses, and Lock Bit
- It takes only 2.5S to program a 12K program file with verification (programming speed was set to 1M while the Max speed could be up to 8M)

Connects to PC
- Uses a USB interface for communication with the front-end software (Probably AVR Studio)
- Using PDIUSBD12, USB 1.1 (USB 2.0 Full Speed) 12Mbits/second
- Each USB AVRISP XPII has a unique ID, a PC could connects to several Devices at the same time

Connects to target board
The USB AVRISP XPII connects to the target board through 3 optional cables. Depending on the existed connector on the target board, the cable has to be changed accordingly.
- Standard 6-pin ISP Connector, Using 6-pin ISP cable
- Standard 10-pin ISP Connector, Using 6-pin to 10-pin ISP cable
- Custom ISP Connector, Using 6-wire multicolour custom connector cable
The figure 1 and 2 shows the pinouts for the 10-pin and 6-pin ISP connectors.

  Figure 1. 10-pin ISP Connector
pinouts for 10-pin ISP Connector
Figure 2. 6-pin ISP Connector
pinouts for 6-pin ISP Connector

Powered from USB bus
- Draws power from the USB bus, No need for Additional Power Supply
- The target board should be powered from Another Power Supply

Downloads

Development resources:user guide, software, etc.
Wiki: www.waveshare.com/wiki/USB_AVRISP_XPII

Lieferumfang

Weight: 0.161 kg

  1. USB AVRISP XPII
  2. USB Cable
  3. 6-pin cable (spare)
  4. 6-pin to 10-pin ISP cable
  5. 6-wire multicolour custom connector cable
  6. User Guide CD


 


Ratings (0)

Average product review

Write your first review and help others with their purchase decision:

Question on item

Question on item