Waveshare 10.1 inch Raspberry Pi Display 1024x600 resistive Touchscreen LCD Display HDMI interface

Artikelnummer: WS40023

HAN: 10.1inch HDMI LCD

Kategorie: Bildschirme


89,95 €

inkl. 19% USt.,

Alter Preis: 99,95 €
sofort verfügbar

Lieferzeit: 1 bis 3 Tage



Beschreibung

10.1inch Resistive Touch Screen LCD, HDMI interface, Designed for Raspberry Pi

Features

  • 1024×600 high resolution
  • Resistive touch control
  • Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable)
  • Raspbian/Ubuntu Drivers are provided (works with your own Raspbian/Ubuntu directly)
  • Also works as a computer monitor, in this case, touch panel is unavailable and HDMI cable is required
  • HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os)
  • Back light control to lower power consumption

Photos

Interface

PIN NO. SYMBOL DESCRIPTION
1, 17 3.3V Power positive (3.3V power input)
2, 4 5V Power positive (5V power input)
3, 5, 7, 8, 10, 11, 12, 13, 15, 16, 18, 24 NC NC
6, 9, 14, 20, 25 GND Ground
19 TP_SI SPI data input of Touch Panel
21 TP_SO SPI data output of Touch Panel
22 TP_IRQ Touch Panel interrupt, low level while the Touch Panel detects touching
23 TP_SCK SPI clock of Touch Panel
26 TP_CS Touch Panel chip selection, low active

External Dimension

10.1inch-HDMI-LCD-dimension

Development Resources

Wiki : www.waveshare.com/wiki/10.1inch_HDMI_LCD

FAQ

Why the LCD doesn't work with my Raspbian?
To use the LCD with the Raspberry Pi official image, driver should be installed first. Please refer to the user manual.
However, for the first testing, you may want to use our provided image directly.
Why the LCD still doesn't work with the Waveshare provided image?
Make sure the hardware connection is correct and connects fine.
Make sure the image in TF card is burnt correctly.
The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact. 
Which power supply should I use?
It is strongly recommended to use a stand-alone 5V/2A power adapter, because the PC's USB port might have not enough power to support the Pi and LCD.

For more info, please check the wiki page.

Selection Guide

Note : 
Pi 3B = Raspberry Pi 3 Model B 
If the LCD is intended to play videos, please choose the one with HDMI display interface for better experience.

RPi LCD Comparing

Package List

Weight: 0.537 kg

  1. 10.1inch HDMI LCD x 1
  2. HDMI connector x 1
  3. Touch pen x 1
  4. RPi screws pack (4pcs) x 1
  5. DVD × 1



 


Bewertungen (0)

Durchschnittliche Artikelbewertung

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufenscheidung:

Frage zum Produkt

Frage zum Produkt



Kaufen Sie diesen Artikel im Bundle