WaveShare Binocular Stereo Vision Expansion Board For Raspberry Pi Compute Module, Small Size

Item number: WS18076

GTIN: 4060137064517

SKU: 18076

Country of origin: CN

TARIC-Code: 8542399000

Binocular Stereo Vision Expansion Board For Raspberry Pi Compute Module CM3 / CM3 Lite / CM3+ / CM3+ Lite, Provides Multi Expansion Ports, Small Size

Category: HATs


42,09 €

including 19% VAT.,

Old price: 51,80 €
Available now!

Shipping time: 1 - 3 workdays



Description

Binocular stereo vision expansion board for Raspberry Pi Compute Module CM3 / CM3 Lite / CM3+ / CM3+ Lite, provides multi expansion ports, small size

  • Binocular vision expansion board
  • dual cameras support, play around with Raspberry Pi binocular vision projects
  • for Raspberry Pi Compute Module CM3 / CM3 Lite / CM3+ / CM3+ Lite

This binocular stereo vision expansion board is specially designed for Raspberry Pi Compute Module, compatible with CM3 / CM3 Lite / CM3+ / CM3+ Lite. It features three camera ports and common used ports like DSI and USB, more other peripheral interfaces are also supported through the FPC connector, all in the small size body.

By connecting with various sorts of cameras, combined with the included IMU fill light board, it is easy and flexible to build different Raspberry Pi stereo vision projects such as binocular parallax ranging, facial identification, living object detection, VR video recording, and so on.

Features at a glance

  • Compatible with Raspberry Pi Compute Module CM3 / CM3 Lite / CM3+ / CM3+ Lite
  • Three camera ports, CAM0 port for default use, and CAM1/CAM3 ports are two alternative options selected by GPIO
  • Onboard DSI port, allows directly connecting with DSI display
  • Onboard USB connector, convenient for flashing system image, or used as regular USB port
  • 36PIN GPIO connector, comes with adapter board for extending UART port and standard 40PIN Raspberry Pi GPIO
  • 24PIN HDMI extended connector, comes with adapter board for connecting with HDMI display
  • 10PIN GPIO/I2C extended connector, for connecting the included ICM20948 IMU fill light board
  • Integrates DS1307 RTC chip, along with CR1220 battery holder
  • Comes with acrylic mounting plate and tripod adapter, make it easy to use with general tripod
  • Comes with development resources(examples and user manual)

Designed for compute module

Supports Raspberry Pi Compute Module CM3 / CM3 Lite / CM3+ / CM3+ Lite

  • Using with camera
  • connecting with single camera
  • directly plug into CAM0 port(enabled by default), OR plug into CAM1/CAM3 port(enabled by GPIO38)
  • connecting with dual cameras
  • it is recommended to use two identical cameras(with the same FOV, distortion, focal length, etc.)
  • Working with Raspberry Pi LCD display
  • directly connecting with Raspberry Pi DSI display, via the onboard DSI port
  • also supports HDMI display, via the HDMI adapter
  • Tripod support
  • comes with acrylic mounting plate to use with general tripod
  • TheDSI Display,IMX219 Camera, and Tripod in photo are NOT included.

What's on board

the CM3 base board

  1. Compute Module connector for connecting with Compute Module CM3 / CM3 Lite / CM3+ / CM3+ Lite
  2. DSI display port for connecting with Raspberry Pi DSI display
  3. 24PIN HDMI extended connector for connecting with HDMI display via HDMI adapter
  4. CSI camera port CAM0: enabled by default CAM1: set GPIO38 low to enable CAM3: set GPIO38 high to enable
  5. Micro SD card slot for Micro SD card with pre-flashed system image
  6. 36PIN GPIO connector for extending UART port and Raspberry Pi GPIO via adapter
  1. 10PIN I2C connector for connecting with ICM20948 IMU fill light board
  2. USB connector for flashing system image, or used as regular USB port
  3. 5V power input
  4. RTC battery holder supports CR1220 button battery
  5. DS1307 RTC chip
  6. USB BOOT ENABLE switch EN: allows flashing system image via USB port DIS: set the port as regular USB port
  7. User key

Lieferumfang

  1. CM3 base board x1
  2. ICM20948 IMU fill light board x1
  3. UART adapter x1
  4. 40PIN header x1
  5. HDMI adapter x1
  6. USB OTG cable x1
  7. Camera mounting board x2
  8. Base mounting board x1
  9. 36PIN FPC x1
  10. 24PIN FPC x1
  11. 10PIN FPC x1
  12. Acrylic mounting plate x1
  13. Tripod adapter x1
  14. 22PIN to 15PIN FPC x2
  15. Screw pack x1

Ratings (0)

Average product review

Write your first review and help others with their purchase decision: